Справочник Пользователя для Bosch Security Systems Inc. H221

 
 
REV-H Users Manual   

Page 2 

 
Quick set cont’d. 
 
4. The screen will stop at the GP (Group) and CH (Channel) screen. If the 
    Group and Channel match the desired receiver group and channel,     
    Proceed to Step 9. If not, proceed to Step 5. 
 
5. To select a different GP/CH, press SET one time. The Group will start 
    flashing. Use the up and down arrows to change the group number. Press 
    the SET button to save the Group.  
 
    After setting the Group, The Channel number will start flashing . Use the   
    up/down arrows to change the Channel number. Press SET and the  
    channel is now saved. 
  
    There are 10 Groups and up to 16 Channels (preferred groups/channels)   
    stored in memory. If desired, you can create new groups/ channels but  
    you must change to a new frequency to store in that group/channel. 
 
    In order to select a new frequency, you must have a “users” group       
     /channel selected. Press the SET button. The Group should be flashing. 
    Press the Up arrow until a group ending with u is found (any u group can  
    be used) Press SET. The Channel should now be flashing. Select a  
    channel with the up/down arrow. Press SET. 
 
    You are now ready to select a frequency to store in the users group  
    above. Press and hold the set and down arrows at the same time for 3  
     seconds and release to go to the next screen function. 
 
8. The next screen displays the operating frequency of the group/channel. 
    If there is no frequency currently stored in the selected users  
    group/channel, a dashed line will be shown. Press SET. The dashed line  
    or frequency will start flashing. Press the up arrow one step at a time to  
    find the desired frequency or hold down the up arrow to scroll through  
    the frequencies quickly. The frequencies can be scrolled either way by  
    the up/down buttons. When the desired frequency is showing, press SET.