Справочник Пользователя для HP SDGOB1191

Printer failure

Resolve printer failure.

▲

If you have already turned the printer off and then on, and this does not solve your

problem, contact HP support.

 

Printhead failure

The printhead in this product has failed.

Ink cartridge problem

First try removing and reinserting the cartridges. If this does not work, clean the cartridge

contacts. If your problem is still not resolved, 

Clean the ink cartridge contacts

CAUTION:

The cleaning procedure should take only a few minutes. Make sure that

the ink cartridges are reinstalled in the product as soon as possible. It is not

recommended to leave the ink cartridges outside of the product longer than 30

minutes. This could result in damage to both the printhead and the ink cartridges.

1.

Check that power is on.

2.

Open cartridge access door.

Wait for print carriage to move to right side of product.

3.

Press tab on cartridge indicated in the error message, then remove it from slot.

Chapter 9

50

Solve a problem

Solve

 a proble

m

DRAFT