Справочник Пользователя для Andrew Wireless Innovations Group RPT-MOR701
User’s manual for Remote Unit MOR701B Power
M0069A0A.doc
Id.-No 151154
Page 67
23-June-99
figure 9-14 Position of counter sunk screws on Active Combiner
The cabling of the Active Combiners depends on the configuration of the Repeater. For
correct connections see assembly guide for the channel modification kits.
correct connections see assembly guide for the channel modification kits.
9.12 Replacement of feed forward amplifier
There is one amplifier mounted on the right-hand side of the Repeater. It is fixed to the
housing by means of 6 socket head cap screws M4x25.
housing by means of 6 socket head cap screws M4x25.
A special reset board is connected to the 15 pole SUB-D connector. (see figure 9-15 Position
of the feed forward amplifier reset board)
of the feed forward amplifier reset board)
This reset board is part of the feed forward amplifier. A new feed forward amplifier will be
delivered with a premounted reset board.
delivered with a premounted reset board.
counter
sunk
screws
sunk
screws