Листовка для Kathrein CAS 120 20010008
Модели
20010008
19
Offset parabolic antennas
Offset parabolic antenna
CAS 120
20010008
Note:
For individual multifeed-reception systems with a satellite spacing of
max. 13°, you can place an order for multifeed-adaptor plates without
indentations (order no. 16800187) with ESC Grassau.
For individual multifeed-reception systems with a satellite spacing of
max. 13°, you can place an order for multifeed-adaptor plates without
indentations (order no. 16800187) with ESC Grassau.
Antenna incl. refl ector and feed system support
With slewable multifeed-mounting device to be able to set the
polarisation optimally. Thus one is able to position the feed
systems into the secondary focal points typ. in multifeed-reception
Refl ector made of aluminium, powder coated
Feed system support and refl ector rear part made of galvanised
sheet steel, powder coated
Optimal electrical data in lowest mechanical dimensions due to
offset-feed
Without additional components, two universal feed systems to
receive signals of satellites 3° to 4° (e.g. ASTRA 19.2°/23.5°) or
6° apart can be mounted on the boom
Additionally required for mounting:
ZAS 120 Azimuth/Elevation support
With slewable multifeed-mounting device to be able to set the
polarisation optimally. Thus one is able to position the feed
systems into the secondary focal points typ. in multifeed-reception
Refl ector made of aluminium, powder coated
Feed system support and refl ector rear part made of galvanised
sheet steel, powder coated
Optimal electrical data in lowest mechanical dimensions due to
offset-feed
Without additional components, two universal feed systems to
receive signals of satellites 3° to 4° (e.g. ASTRA 19.2°/23.5°) or
6° apart can be mounted on the boom
Additionally required for mounting:
ZAS 120 Azimuth/Elevation support
Type
CAS 120
Order no.
20010008
Diameter
m
1.2
Colour
White (similar to RAL 9002)
Reception range
GHz
10.70-12.75
Antenna gain at 10.70-11.70 GHz/11.70-12.50 GHz/12.50-12.75 GHz
dBi
41.5/42.15/42.5
Half-power beam width ¹
)
°
1.43
System fi gure of merit ²
)
feed system in centre; UAS 177/272/485
dB/K
21.6/22.6
System fi gure of merit ²
)
feed system in centre; UAS 481/484
dB/K
20.9/21.9
System fi gure of merit ²
)
feed system distance 3°-4°; UAS 177/272/485
dB/K
21.4/22.4
System fi gure of merit ²
)
feed system distance 3°-4°; UAS 481/484
dB/K
20.8/21.7
System fi gure of merit ²
)
feed system distance 6°; UAS 177/272/485
dB/K
21.3/22.2
System fi gure of merit ²
)
feed system distance 6°; UAS 481/484
dB/K
20.6/21.5
Cross-polarisation decoupling
dB
> 30
Wind load ³
)
N
1,296
Max. allowable wind speed
km/h
157
Mast clamp range
mm
50-90
Setting range Elevation/Azimuth
°
5-50/360
Dimensions width
1,234
Dimensions height max.
mm
1,570
Dimensions protrusion max. (mast centre without feed system)
mm
1,408
Packing unit dimensions
mm
1,330 x 1,330 x 250
Approx. weight net/gross
kg
18.3/29.0
¹
)
At mid-band
²
)
G/T at 11.3/12.5 GHz
³
)
At a dynamic pressure of 800 N/m² acc. to EN 60728-11 (see page 50, ’Wind load indications‘)
CAS 120 with two feed systems