Справочник Пользователя для Mitsubishi Electric Corp 232C-1P

A point to notice

Supplementary information

1 : Shows date and present time.

2 : Shows date, day of the week,

present time and recording mode.

3 : Displays nothing.  In case of  alarm

recording, displays same items as
DISPLAY MODE 2.

4 : Displays nothing.

* shown when DISPLAY MODE 1, 2 or 3 is selected.

SMALL : The size of the letters become small.

LARGE : The size of the letters become large.

: The blue colored screen overlays on the live picture

when the menu is displayed on the monitor.

: The live picture is overlaid with the menu display.

•

When the setting is OFF and the video signal is not present,
the blue colored screen and the menu is displayed on the
monitor.

•

When the setting is ON and the video signal is not present,
the background color will be in blue.  Also, the warning “NO
SIGNAL” flashes on screen and “noSIg” flashes on the
fluorescent display during recording.

<DISPLAY>

DISPLAY MODE

1

TIME DATE SIZE

SMALL

BLUE BACK

OFF

e.g.<MODE 1>

07-09-’01 00:00:00

0 7 - 0 9 - ’ 0 1   2 0 : 2 5 : 0 0   A 0 0 0 1

0 7 - 0 9 - ’ 0 1   M O N   A 0 0 0 1
2 0 : 2 5 : 0 0               2

 

 page 10, Timer Recording.

ENGLISH
FRANÇAIS
ESPAÑOL

Use JOG to select,
and ENTER .

The menu which appears on screen is offered in 3 languages,
English (ENGLISH), Spanish (ESPAÑOL) or French
(FRANÇAIS).
This menu appears by pressing MENU button, when the VCR is
turned on for the first time after the initial purchase or when
RESET button is pressed (while unit is ON).

1. Press MENU button.

•

The menu as shown to the right
appears.

2. Turn JOG to select the desired

language.

3. Turn SHUTTLE to the right.

•

<MAIN MENU> in the selected language appears on
screen.

4. Press MENU button to exit.

•

After first time setup and selection of the language to be
used, the only way to go back and access the main menu in
the three languages is to PRESS the RESET button found
on the rear panel.  The RESET button can be accessed with
a small pointed object.  Once the RESET button is pressed,
repeat steps 1 to 4 above.

Sets the display format of the date
and present time on screen.

Sets the timer recording.

Sets the alarm recording mode,
alarm recording duration and emergency recording, etc.

Sets the frequency division ratio of CLOCK OUT, output
signal of CALL OUT terminal and MODE OUT terminal, etc.

Displays the power loss list and alarm list, etc.  Also,
initializes all menu settings, clears the power loss list and
alarm list.

Sets the present time and the operation at the tape end, etc.

<MAIN MENU>

DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP

Use JOG to select,
and ENTER.
Press MENU to exit.