Справочник Пользователя для Mitsubishi Electric Corp 232C-1P

A point to notice

Supplementary information

Illuminates during the counter memory stop.
Also, illuminates when the month (of time and date) is being
entered via the front panel.

Illuminates when the VCR is turned on after a power failure
occurs during recording.

Flashes during alarm recording and stays on when the alarm
recording is finished.

Illuminates during the time date search.
Also, illuminates when the day (of time and date) is being
entered via the front panel.

Flashes when recording an index signal and illuminates
during the index number setup and the index search. (Index
number is shown on the Recording and Playback Mode
display.)

Illuminates during the skip search.

Illuminates when “DAYLIGHT SAVINGS” is set to “ON”.

Indicates the tape speed.
SP is standard play; EP is extended play.

Illuminates when “S-VHS/S-ET” in “RECORDING SET UP”
menu is set to “ON”.
Also, illuminates during the recording using S-VHS tape and
during the playback using S-VHS tape recorded in S-VHS
mode.

Iluminates during the recording using VHS tape, during the
playback using VHS tape recorded in S-VHS ET mode and
when a VHS tape recorded in S-VHS ET mode is inserted to
the VCR, providing “S-VHS/S-ET” in “RECORDING SET UP”
menu is set to “ON”.

Illuminates when “TAPE END” in “FIRST TIME SET UP”
menu is set to “REPEAT” or “ALARM•PROT”.

Illuminates when a tape is inserted.

Illuminates when the VCR is in stand-by for timer recording
or during timer recording.

Indicates the position on the tape.  S indicates the Start of
the tape and E indicates the End of the tape.

Counter/Clock display
While the VCR is turned on, indicates the relative position on
the tape. (The Counter stops counting where no recording is
made on the tape.)  When it is off, (when set) the clock (24-
hour format) is shown.

Recording and Playback Mode/Index Number display
Displays the number corresponding to a selected recording
or playback mode.  The mode shown here varies by the
“TAPE LENGTH” (T-120 or T-160) setting in “FIRST TIME
SET UP” menu.  Also, displays the index number during the
index number setup and the index search.

Illuminates when “EMERGENCY REC” in “RECORDING
SET UP” menu is set to “ON”.

      : illuminates when all buttons (except REC button

and EJECT button) are locked.

   : illuminates when all buttons are locked.

Illuminates during playback.

Illuminates during recording.