Справочник Пользователя для Mitsubishi Electric Corp 485SR
6
Note
A point to notice
Info.
Supplementary information
Basic Functions
Tapes can be loaded into your VCR as long as the VCR is
plugged into an outlet. Even if the VCR is turned off, loading a
tape will automatically cause it to turn on. Use only video
plugged into an outlet. Even if the VCR is turned off, loading a
tape will automatically cause it to turn on. Use only video
cassette tapes marked
or
.
Important notice:
• Use high grade (HG) tapes for super resolution
• Use high grade (HG) tapes for super resolution
recording. We recommend to use S-VHS tapes for
super resolution recording at L18H-L40H mode.
super resolution recording at L18H-L40H mode.
• It is recommended to use T-120 tape. Do not use
tapes longer than T-160.
Loading
1. Insert the tape into the cassette slot
by holding it so that the long narrow
edge with the contents label faces
towards you.
edge with the contents label faces
towards you.
•
The Cassette Status indicator
illuminates on the fluorescent
display when the tape is
inserted.
illuminates on the fluorescent
display when the tape is
inserted.
Note
•
Your VCR has a protection circuit
which will eject the tape if it is loaded
improperly. If the VCR ejects the
tape, remove it completely and
check that the long narrow edge with
the contents label is facing towards
you, and the clear plastic window
that shows the video tape is facing
upwards. Wait a few seconds, and
try inserting the tape again.
which will eject the tape if it is loaded
improperly. If the VCR ejects the
tape, remove it completely and
check that the long narrow edge with
the contents label is facing towards
you, and the clear plastic window
that shows the video tape is facing
upwards. Wait a few seconds, and
try inserting the tape again.
Info.
•
The VCR automatically turns on when the tape is loaded,
AUTO POWER ON.
AUTO POWER ON.
•
The VCR automatically plays back the tape if the erase
prevention tab is removed, AUTO PLAY.
prevention tab is removed, AUTO PLAY.
•
You cannot insert a tape when all of the VCR’s all buttons
are locked and the Lock All indicator (
are locked and the Lock All indicator (
) is illuminating.
Unloading
1. Press EJECT button on the front panel
of the VCR.
2. Remove the tape.
Note
•
When ejecting the tape during recording, press STOP button
once to stop recording and then press EJECT button to
unload the tape.
once to stop recording and then press EJECT button to
unload the tape.
•
You cannot eject a tape when all of the VCR’s buttons are
locked and the Lock All indicator (
locked and the Lock All indicator (
) is illuminating.
Info.
•
The VCR will eject a tape even if the power to the VCR is
turned off (as long as the VCR is plugged into an outlet),
POWER OFF EJECT.
turned off (as long as the VCR is plugged into an outlet),
POWER OFF EJECT.
erase
prevention
tab
prevention
tab
Loading/Unloading a Tape
6H
L18H
L30H
L30H
48H
72H
96H
72H
96H
0H
50
35
20
20
15
15
35
20
20
15
15
1
Recording
time mode
time mode
Number of
tape use
8H
L24H
L40H
L40H
64H
96H
96H
128H
0H
45
30
10
30
10
5
3
3
1
3
3
1
Recording
time mode
time mode
Number of
tape use
In case of T-120 setting
In case of T-160 setting
EJECT
INCORRECT
Preventing accidental erase
Tapes come with an erase prevention
tab which, when removed, prevents the
tape’s contents from being erased or
recorded over. If the tape you insert in
the VCR has the erase prevention tab
removed, your VCR will automatically
eject it if you attempt to record on it.
tab which, when removed, prevents the
tape’s contents from being erased or
recorded over. If the tape you insert in
the VCR has the erase prevention tab
removed, your VCR will automatically
eject it if you attempt to record on it.
Note
•
We recommend that you take any broken or torn tapes to a
professional for repair. The adhesives on many common
types of tape could damage the head of your VCR.
professional for repair. The adhesives on many common
types of tape could damage the head of your VCR.
Recommended number of tape use
It is recommended that the cassette tape be replaced with a new
one depending on the recording time mode and type of tape
used. Providing TAPE LENGTH of FIRST TIME SET UP menu is
set to the same type the tape you use.
one depending on the recording time mode and type of tape
used. Providing TAPE LENGTH of FIRST TIME SET UP menu is
set to the same type the tape you use.