Справочник Пользователя для Mitsubishi Electric Corp 485SR

Reference page

   Use of JOG dial and SHUTTLE ring for menu setting

Use JOG by placing a finger in the indent and turning.

•

Turning JOG to the right moves the selection forward.
Turning it to the left moves the selection back.

•

If the selection is not flashing, turn JOG to the right to move
the cursor (

) down one position then to the left to move

back to your selection.

SHUTTLE ring
•

If you turn SHUTTLE to the right/left end and release it,
SHUTTLE comes back to the center position automatically.

•

Navigate to the next menu layer by turning SHUTTLE to the
right. Return to the previous menu layer by turning
SHUTTLE to the left.

You can adjust the VCR’s clock from the front panel, even though
the VCR is turned off.  This function lets you to set the information
in the order of time, month, day and year.  The hour time is
entered twice.  This is due to the daylight saving time.

Example : Setting the day and present time to 10:38 a.m., 11th
December, 2002.

1. When the VCR and peripheral devices

are turned off, press MENU button for
more than 3 seconds.

•

The hour digits of the clock on the
fluorescent display starts flashing.

2. Turn JOG to set the hour digits.

When the flashing item is same as the
current time, turn SHUTTLE without
turning JOG.

3. Turn SHUTTLE to the right to make the

10-minute digit flash and turn JOG to
adjust.

4. Turn SHUTTLE to the right to make the 1-

minute digit flash and turn JOG to adjust.

To finish the clock adjustment now,
press MENU button for more than 3
seconds.

5. Turn SHUTTLE to the right to make the

month digits flash and turn JOG to adjust.

•

The Month indicator ( ) illuminates.

6. Turn SHUTTLE to the right to make the

day digits flash and turn JOG to adjust.

•

The Day indicator ( ) illuminates.

7. Turn SHUTTLE to the right to make the

year digits flash and turn JOG to adjust.

8. Turn SHUTTLE to the right.

•

The VCR’s clock is set now.

9. Repeat steps 1 and 2 and turn SHUTTLE to the left to exit

after hour mark is entered the second time.

•

Time and Date information can also be entered via the Menu
System (FIRST TIME SETUP/TIME DATE ADJUST).

Set the clock as described to the left, but set 1-minute digit to one
or two minutes ahead of the reference time being used.  After the
step 7 to the left, when reference time reaches 00 second of the
minute you have chosen, turn SHUTTLE to the right.  The VCR’s
clock now corresponds to the reference time to the nearest
second.