Справочник Пользователя для Mitsubishi Electric Corp 485SR

A point to notice

Supplementary information

1 : Shows date and present time.

2 : Shows date, day of the week,

present time and recording mode.

3 : Displays nothing.  In case of  alarm

recording, displays same items as
DISPLAY MODE 2.

4 : Displays nothing.

<DISPLAY>

DISPLAY MODE

1

TIME DATE SIZE

SMALL

BLUE BACK

OFF

e.g.<MODE 1>

07-09-’02 00:00:00

0 7 - 0 9 - ’ 0 2   2 0 : 2 5 : 0 0   A 0 0 0 1

0 7 - 0 9 - ’ 0 2   T U E   A 0 0 0 1
2 0 : 2 5 : 0 0               6

Setting the alarm recording mode
(ALARM REC MODE)
Sets the alarm recording time mode.

•

Providing TAPE LENGTH in FIRST
TIME SET UP menu is set to T-120.

When JOG is turned, the display will
be switched in the order of 6H 
L18H 

 L30H 

 6H 

 ...

•

Providing TAPE LENGTH in FIRST TIME SET UP menu is set
to T-160.

When JOG is turned, the display will be switched in the order
of 8H 

 L24H 

 L40H 

 8H 

 ...

Setting the alarm recording  duration (ALARM REC
DURATION)
Sets the duration of the alarm recording period.  When JOG is
turned, the display will be switched in the order of 1M (minute) 
2M 

 5M 

 10M 

 MAN1 

 MAN2 

 15S (second) 

 30S

 45S 

 1M 

 ...

: Starts alarm recording when the ALM IN terminal is

grounded while the VCR is recording, in stop mode,
turned off or in stand-by mode for timer recording.

: Starts alarm recording when the ALM IN terminal is

grounded during recording.

: Recording/playback is made at over 400 lines of

resolution.

: Recording/playback is made at VHS mode.

<RECORDING SET UP>

ALARM REC MODE

6H

ALARM REC DURATION

1M

EMERGENCY REC

OFF

SUPER RESOLUTION

ON

ONE SHOT•FIELD

1

ONE SHOT•INTERVAL

SHOT

 

 page 10, Timer Recording.

ENGLISH
FRANÇAIS
ESPAÑOL

Use JOG to select,
and ENTER .

The menu which appears on screen offers 3 languages, English
(ENGLISH), Spanish (ESPAÑOL) or French (FRANÇAIS).
This menu appears by pressing MENU button, when the VCR is
turned on for the first time after the purchase or when RESET
button is pressed during use.

1. Press MENU button.

•

The menu as shown to the right
appears.

2. Turn JOG to select the desired

language.

3. Turn SHUTTLE to the right.

•

<MAIN MENU> in the selected language appears on
screen.

4. Press MENU button to exit.

•

After first time setup and selection of the language to be used,
the only way to go back and access the main menu in the
three languages is to PRESS the RESET button found on the
rear panel.  The RESET button can be accessed with a small
pointed object.  Once the RESET button is pressed, repeat
steps 1 to 4 above.

Sets the display format of the date
and present time on screen.

Sets the timer recording.

Sets the alarm recording mode,
alarm recording duration and emergency recording, etc.

Sets the frequency division ratio of CLOCK OUT, output signal
of CALL OUT terminal and MODE OUT terminal, etc.

Displays the power loss list and alarm list, etc.  Also, initializes
all menu settings, clears the power loss list and alarm list.

Sets the present time and the operation at the tape end, etc.

<MAIN MENU>

DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL

MAINTENANCE
CLOCK/FIRST TIME SET UP

Use JOG to select,
and ENTER.
Press MENU to exit.

* shown when DISPLAY MODE 1, 2 or 3 is selected.

SMALL : The size of the letters become small.

LARGE : The size of the letters become large.

: The blue colored screen overlays on the recorded

picture when the menu is displayed on the monitor.

: The recorded picture is overlaid with the menu display.

•

When the setting is OFF and the video signal is not input, the
blue colored screen overlays on the recorded picture when
the menu is displayed on the monitor.

•

When the setting is ON and the video signal is not input, the
background color will be in blue.  Also, the warning “NO
SIGNAL” flashes on screen and “noSIg” flashes on the
fluorescent display during recording.