Справочник Пользователя для Mitsubishi Electric Corp CP9000DW

2

If, for some reason, printing is not possible or an error occurs during printing, the indicators on the front panel will

illuminate or blink. In this case, follow the procedure described below.

If, for some reason, printing is not possible or an error occurs during printing,

ALARM

Causes and Countermeasures

The door is open.

• Close the door.

A paper jam occurs.

• Refer to “Overcoming paper jams.”

The temperature of the thermal head is too high.

• Wait until the indication goes off. * Note

The ink ribbon is not loaded.

The ink ribbon is used up.

• Replace the ink ribbon with a new one.

The combination of the ink ribbon and the print paper

is incorrect.

• Use a correct combination of the ink ribbon and the

print paper.

The print paper is not installed.

The print paper is used up.

• Install new print paper.

An ink ribbon distinction error occurs.

The combination of the ink ribbon and the print paper

is incorrect.

• Use a correct combination of the ink ribbon and the

print paper.

An ink ribbon jam occurs.

• Install a new ink ribbon.

•

Install a new ink ribbon.

Other errors

*Note

If an error occurs while the continuous printing is ongoing, it is resumed after the error indication goes off.

PAPER/

INK RIBBON

DATA

READY

Page

: Steadyon

: off

: Blinking

 : Depends on the previous condition

7

19

14-15

---

12-13

14-15

20

COOLING

---

---