Справочник Пользователя для Shenzhen Geniusidea Technology Ltd. FOLLOW
Repair and maintenance
The users can change the casing and propeller of the "Follow" drone according to instructions in this manual.
If the casing or propeller of the "Follow" drone is damaged, the user can follow the instructions in this manual to replace it.
(When the users buy the "Follow" drone, one set of propeller and two sets of colorful casings will be donated additionally).
Please follow the following steps to replace the new component or accessory. Please use the tools and accessories officially
authorized by the "Follow" drone.
Remove and replace the propeller
The four propellers of the "Follow" drone are composed of two sets of propellers rotating in opposite directions, of which
those on the diagonal line rotate in the same direction.
When disassembling and replacing the propeller, please select the right propeller and mount it on the corresponding
position.
1.
Ensure that the "Follow" drone is power-off,
2.
Place the drone on the level surface;
3.
Exert an upward and horizontal force on the paddle.
4.
Separate the paddle bottom from the motor.
5.
Align the new paddle to the correct slot and mount it on the motor.