Справочник Пользователя для izotope 1DX
Copyright 2017, Izotope
Confidential
January 30, 2017
60 Hampshire St, Cambridge, MA 02139
1DX Wi-Fi Module Installation Manual
The FCC ID of this product is as follows:
FCC ID: 2AKPU1DX
For OEM integration only – device cannot be sold to general public.
Therefore we ask the OEM to include the following statements required by FCC on the product and in
the Installation Manual notice section.
Contents
Therefore we ask the OEM to include the following statements required by FCC on the product and in
the Installation Manual notice section.
Contents
1. Supply Voltage
2. Antenna
3. Notice
2. Antenna
3. Notice
1. Supply Voltage
Min.
Typ.
Max.
Unit
Specification Temperature Range
-10
+25
+55 deg C
Specification Voltage
VBAT
3.2
3.6
4.2 V
VDDIO
1.71
1.8 or 3.3
3.63 V
2. Antenna
The antenna must be designed to meet the specifications of the antenna as shown below.
1. It is the same type as the antenna type of antenna specifications.
Confirm the same dimensions as in the Gerber file.
2. The antenna gain is lower than the gain level given in antenna specifications.
Measure the gain, and confirm the peak gain is less than the application value (1.4dBi)
3. The spurious emission level is not worse than the original certified design.
Measure the spurious emissions, and confirm degradation of less than 3dB than spurious value of worst
case from the report used for the application.
case from the report used for the application.
Please send those reports to iZotope.