Справочник Пользователя для INNOMEDIA TECHNOLOGY INC MTA-W-0000001
InnoMedia 8328-1 Administrative Guide
Page 54
Copyright © 2017 InnoMedia. All rights reserved.
7
A
PPENDIX
A
LED
S
TATES
7.1
Model MTA8328-1N
LEDs
Blinking State
MTA8328 State
PWR
Steady Green
Powered ON.
Off
Powered OFF.
WAN
Solid or Blinking Green
WAN Ethernet 100BT link is active, blinks with activity.
Solid or Blinking Yellow
WAN Ethernet 10BT link is active, blinks with activity.
Off
WAN Ethernet link is not connected.
Fast Blinking Green
(0.25 secs on, 0.25 secs
off)
(0.25 secs on, 0.25 secs
off)
WAN Ethernet 100BT link is active but is unable to reach the
Internet.
Internet.
Fast Blinking Yellow
(0.25 secs on, 0.25 secs
off)
(0.25 secs on, 0.25 secs
off)
WAN Ethernet 10BT link is active but is unable to reach the
Internet.
Internet.
Medium-Slow Blinking
Green (1 sec on, 1 sec off)
Green (1 sec on, 1 sec off)
Device firmware is being upgraded. The PHONE LED blinks in
unison with the WAN LED.
unison with the WAN LED.
LAN
Solid Green
LAN Ethernet 100BT link is active.
Solid Yellow
LAN Ethernet 10BT link is active.
Off
LAN Ethernet link is not connected.
PHONE
Off
- No power, OR
- Device is initializing, OR
- Failed to register for voice services, OR
- Line is disabled.
- Device is initializing, OR
- Failed to register for voice services, OR
- Line is disabled.
Steady Green
The device is ready to make calls.
Slow Blinking Green (3
secs on, 1 sec off)
secs on, 1 sec off)
There are new voicemail messages.
Medium-Fast Blinking
Green (0.5 secs on, 0.5
secs off)
Green (0.5 secs on, 0.5
secs off)
The device is registered and ready to make calls, and the line is in
use.
use.
Fast Blinking Red (0.25
secs on, 0.25 secs off)
secs on, 0.25 secs off)
One or more line diagnostics tests (GR909) failed. This state is
cleared when the GR-909 tests are run again and all tests pass, or
when the device is rebooted.
cleared when the GR-909 tests are run again and all tests pass, or
when the device is rebooted.
Medium-Slow Blinking
Green (1 sec on, 1 sec off)
Green (1 sec on, 1 sec off)
Device firmware is being upgraded. The PHONE LED blinks in
unison with the WAN LED.
unison with the WAN LED.