Справочник Пользователя для Xiamen Smarttek Co. Ltd. WSP404
3
Reset button
• Reset. Press and hold the Reset button for ten seconds until the LED
indicator flashes three times to restore the smart plug to default factory
settings.
• Pair mode. Press and hold the Reset button for about three seconds until
the LED indicator flashes three times. Then, you can pair the lighting switch
with another device.
indicator flashes three times to restore the smart plug to default factory
settings.
• Pair mode. Press and hold the Reset button for about three seconds until
the LED indicator flashes three times. Then, you can pair the lighting switch
with another device.
LED status
What it means
LED keeps flashing
(0.5s On, 2s Off)
Device has not joined a network.
Flashes three times
(0.1s On/Off)
Return to Factory Settings.
Blue LED
Device is ON.
Red LED
Device is OFF.
LED indicator
The LED status gives the following information:
3.1 To get started, you will need:
A SEG-X3 Gateway.
The SmartOWON mobile app.
The SmartOWON mobile app.
3.2 Connect to the gateway’s network
1. Set your gateway to permit joining.
2. Plug in the smart plug and the LED indicator will start flashing (reset it if
not).
3. The smart plug will join the gateway automatically and the LED indicator
will turn steady when successfully joined.
2. Plug in the smart plug and the LED indicator will start flashing (reset it if
not).
3. The smart plug will join the gateway automatically and the LED indicator
will turn steady when successfully joined.
Get started
3