Справочник Пользователя для I-DING MEDICAL EQUIPMENT CO. LTD. IDING2017
9
Precautions
1.
To place the product in front of the diaper, do the
following two tests first to ensure that the urine is
properly sensed:
properly sensed:
(1)
Click the launcher on the black button, launcher LED
lights will light up, while the alarm will also sound and
light, which means launcher and alarm are all with
power.
light, which means launcher and alarm are all with
power.
(2)
Dropping water in the sensing cable, the alarm will
immediately sound and light, which means that the
sensor cable and launcher have the correct link.
sensor cable and launcher have the correct link.
2.
Will be exposed to the skin of the spring clip place a
sterile gauze to avoid direct skin contact.
3.
Sensory cable and spring clip should be placed along the
groin below the urethra in the position near the
perineum, male and female positions are different,
please put appropriate position discretion, to avoid
placing the sensor cable position or distance is too far
can not be caused by sensing .
perineum, male and female positions are different,
please put appropriate position discretion, to avoid
placing the sensor cable position or distance is too far
can not be caused by sensing .
4.
To take off the launcher and sense the cable, please open
the diaper or take off the diaper before removing the
cable and launcher.
cable and launcher.
5. This product is for personal hygiene and to avoid
cross-infection, sensing cable, rubber wrap and spring
clip for personal use only, please do not for different
users.
clip for personal use only, please do not for different
users.
6. Do not reuse the sensing cable, rubber wrap and spring
clip to avoid infection.
7.
When the sensing cable is unplugged from the launcher,
remove the sensing cable manually according to the
socket end. Do not pull the cable part directly. Otherwise,
socket end. Do not pull the cable part directly. Otherwise,