Справочник Пользователя для CCL ELECTRONICS LTD 84291702
6
1
2
3
4
5
7
8
9
10
A. Mounting on pole (Pole Diameter 1”~1.3” (25~33mm)
B. Mounting on the railing
1.5 meter off the ground
Points to
NORTH
1
2
Wind direction/Wind speed
1. Wind direction indicator
2. Wind direction indicator(s) during last hour
3. Current wind direction indicator
4. Wind speed indicator
5. Wind levels and indicator
6. Beaufort scale reading
7. Current wind direction reading
8. Average/Gust wind indicator
9. Wind speed unit (mph / m/s / km/h / knots)
10. Hi Alert and Alarm
2. Wind direction indicator(s) during last hour
3. Current wind direction indicator
4. Wind speed indicator
5. Wind levels and indicator
6. Beaufort scale reading
7. Current wind direction reading
8. Average/Gust wind indicator
9. Wind speed unit (mph / m/s / km/h / knots)
10. Hi Alert and Alarm
Wind chill/ Heat index/ Indoor dewpoint
1. Wind chill/ Heat index/ Indoor dewpoint indicator
2. Wind chill/ Heat index/ Indoor dewpoint reading
2. Wind chill/ Heat index/ Indoor dewpoint reading
INSTALLATION
Wireless 5-in-1 Sensor
Wireless 5-in-1 Sensor
Your wireless 5-in-1 sensor measures wind-speed, wind-direction, rainfall, temperature and humidity for you.
It’s fully assembled and calibrated for your easy installation.
It’s fully assembled and calibrated for your easy installation.
Battery and installation
Unscrew the battery door at bottom of unit and insert the batteries according to the “+/-”polarity indicated.
Screw the battery door compartment on tightly.
Screw the battery door compartment on tightly.
Note:
The red LED will begin flashing every 12 seconds.
The red LED will begin flashing every 12 seconds.
Install the wireless 5-in-1 sensor in an
open location with no obstructions
above and around the sensor for
accurate rain and wind measurement.
Install the sensor with the smaller end
facing the North to properly orient the
wind direction vane.
Secure the mounting stand and bracket
(included) to a post or pole, and allow
minimum 1.5m off the ground.
open location with no obstructions
above and around the sensor for
accurate rain and wind measurement.
Install the sensor with the smaller end
facing the North to properly orient the
wind direction vane.
Secure the mounting stand and bracket
(included) to a post or pole, and allow
minimum 1.5m off the ground.
Mounting guidelines:
1. Install the wireless 5-in-1 sensor at least 1.5m off the ground for better and more accurate wind measurements.
2. Choose an open area within 150 meters from the LCD display Main Unit.
3. Install the wireless 5-in-1 sensor as level as possible to achieve accurate rain and wind measurements.
2. Choose an open area within 150 meters from the LCD display Main Unit.
3. Install the wireless 5-in-1 sensor as level as possible to achieve accurate rain and wind measurements.
A bubble level device is provided to ensure a level installation.
4. Mount the wireless 5-in-1 sensor with the wind meter end pointing to the North to correctly orient direction of
the wind vane.
5
6