Справочник Пользователя для GuangZhou SunFieldAimo Electronic Technology Co. Ltd CG-3015

Item Description

Pegasus Body (3-014)

The body of the Pegasus can run suspended on cables, or on the ground on

the trolley. The body responds to the Cinegears controller, and has two

obtrusion sensors on either side to stop the motion of the body if something is

blocking its path. The body has a D-Tap outlet, ensuring stable surge-protected

12-24 V DC output. It also has two 2-pin Lemo outlets: a 12-18V/3.5A, and a

12-18V/8A outlet. The Pegasus body has an OFF/ON switch, as well as a CODE

button, and a toggle switch to alternate between cable and trolley mode: the trolley

mode is denoted by the larger icon, which represents the larger rubber wheels of

the trolley mode. The power source is a standard V-lock battery plate, with other

battery-type options available. There is also an adjustable steering wheel on the

front end of the body, allowing for customizable trajectory curvature.

Wireless Controller (3-015)

This Cinegears controller is a high-end quality technology that sends signal to

the Pegasus body according to the user's programmed or manual instructions.

The controller functions in both manual and automatic mode, and has a

wide-variety of programmable features and modes so the user can pre-set

parameters, as well as monitor the progress of set programs. For full instructions

on the functionality and programming of the Controller, see

Controller

Description

(page

8-11).

Stability Arms with Ground Balancing Wheel (3-0155)

The Stability Arms allow for greater stability and functional safety of the mounted

camera for GROUND USE ONLY. The stability arms are easily mounted: simply

screw in a stability arm on either/both sides of the body (the threaded ports for the

stability arms are halfway along either side of the body). Unscrew the arms to

remove the stability arms. The stability arms are highly recommended for ground

use, to ensure stability, and to prevent toppling with heavy cameras or Gimbals

with a high center of gravity.

15mm Balance Rod (3-0156)

The mounting extension arm is an optional feature that enables an extended

perspective. The mounting extension arm can be used with both the cable and

trolley mode: with the cable mode, you can mount the housing so the camera rests

standing upright, or dangling upside down, and the mounting extension arm can be

utilized to extend the camera in either direction.

2 .

3 .

4 .