Справочник Пользователя для INDI TAG Co. Ltd. IDM16
TagZone/ESL Administrator Guide
II. Installation
27
Please connect the PoE injector to the IDAP1A following the steps.
① Connect the power cord of injector to the AC outlet.
② Data In(LAN) and Data Out(POE) ports are in injector.
③ Connect the router with Data IN(LAN) port using Ethernet cable.
④ Connect the Data Out(PoE) port to the AP.
2.4 Check
AP (IDAP1A) operation
4 LED on the front of the AP will be indicated once the AP connected properly.
Ÿ
Red LED
Power ON
Ÿ
Green LED
Network connected
Ÿ
Yellow LED flickering
Network communication
Ÿ
Blue LED flickering / Red LED Flickering
TAG communicating by wireless / communication Error
PoE Injector
Connect to the LAN Port
IDAP1A