Справочник Пользователя для Shenzhen Rambo Weiye Electronic Co. Ltd. RM8
RM8
User Manual
B u tto n +
M F B
B u tto n -
Thank you for choosing our Bluetooth
earphone, please read this manual
before usage.
Specification
Item No.: RM8
Bluetooth Version 4.1
CSRBC8640 chipset
Micro USB charging port
Support HFP, HSP, A2DP and AVRCP
Connect with two Bluetooth devices
simultaneously
Operating Range: Up to 33 feet (10
meters)
90mAh rechargeable batteries
Talk time: 5-7 hours
90mAh rechargeable batteries
Talk time: 5-7 hours
Music Play time: 4-6 hours
Standby time: 200 hours
Charging time: 1-2 hours
iPhone battery indication
CVC echo and noise cancellation
CVC echo and noise cancellation
Support voice prompt for MMI:
Power On / Pairing / Connected /Battery
Low /Power Off, etc.
Power On / Power Off
Power on: Long press MFB 1 second,
blue LED flashes with a prompt “power
on”.
Power off: Long press MFB 4 seconds,
red LED flashes with a prompt “power
off”.
Note: Low battery alarm: red LED flash
Note: Low battery alarm: red LED flash
several times with a prompt “Battery
Low”.
Charging
There are no detachable batteries inside
the headphone as it uses installed rechar-
geable batteries. Please do not tamper or
change the batteries as this can cause
you harm. We will not be held liable for
any damages done due to unauthorized
tampering or opening of the earphones
which in doing so also voids all warranty
benefits.
Connect the charging cable's Micro USB
port to the earphone and the USB Port to
a phone charger/car charger/adapter/
computer/power bank or any device with
a USB port. When charging, the red LED
will be constantly on and will change into
blue once the earphone has been fully
charged.
Note: please charge the earphone for 2
hours before using it for the first time.
The earphone is not water, sweat or dust
The earphone is not water, sweat or dust
resistant/proof so avoid storing the ear-
phones in damp and wet places where it
can incur damages
Pairing
Pairing and connection with a device:
Step 1: Long press MFB until the LED
rapidly flashes red and blue to put into
pairing mode.
Step 2: Turn on the Bluetooth on your
Step 2: Turn on the Bluetooth on your
device and scan for nearby devices until
Q8 appears. Click on RM8 to initiate
connection with the earphone.
Step 3: Once the earphone and Bluetooth
Step 3: Once the earphone and Bluetooth
enabled device have been successfully
paired, your device will automatically pair
with the earphone and the earphone's
LED will only flash blue every so often.
Pairing with 2 devices:
Repeat Steps 1 to 3 for pairing the ear-
phone to 1 device.
Step 4: Turn off Bluetooth application
Step 4: Turn off Bluetooth application
on your first device.
Step 5: Repeat steps 1 to 3 to pair ear-
Step 5: Repeat steps 1 to 3 to pair ear-
phones with the second device
Step 6: Turn on the Bluetooth applica-
Step 6: Turn on the Bluetooth applica-
tion on the first paired device and click
on
EM
8 to connect to the earphone.
(note: the earphone should still be con
nected to the second device)
Step 7: The earphone should now
Step 7: The earphone should now
be connected to both devices
simultaneously.
Note: If the earphone has been paired
Note: If the earphone has been paired
with a device before, simply press MFB
until the blue LED is flashing and the
earphone will pair with the device auto
matically (make sure device has
Bluetooth switch on)
Note: If your mobile phone is below
version 2.1, then you need to enter
password “0000”.
Important:
Important:
If the pairing can't be com-
pleted within 90 seconds while the
pairing mode is activated, which means
the pairing is unsuccessful, please
repeat Step 1 to Step 5 to pair the
headset with the mobile phone again.
Volume Control
Quickly press + button to increase the
volume
Quickly press - button to lower the vo-
lume
Play/Pause
While listening to music, press MFB to
pause the music. To resume listening
to music, press MFB again
Track Control
While listening to music long press +
Button 1 second until the track changes
to the next song
While listening to music long press -
Button 1 second until the track goes
back to the previous song.
Voice Dialing
While connected to your device, long
press MFB 1 second until a prompt “
Voice Dial”, to start open voice dialing.
Long press MFB for another second
to stop voice dialing.
Note: please ensure your mobile phone
support voice dialing function and the
voice tag assigned for this feature.
Note: depending on your phone type,
the actual operation may be different.
Answering Calls
Answering calls (while connected to 1
mobile phone)
During an incoming call, quickly press
MFB to accept and pick up the call.
Answering Calls (while connected to 2
mobile phones)
Press MFB once to receive the second
call from the second device. In doing
this, you are also ending the first call
from the first device.
Press MFB twice to receive the second
call from the second device and keep
the first call on hold from the first device.
To go back and forth the 2 calls, quickly
press MFB once.
Ending Calls
Quickly press MFB to end a call
Rejecting Calls
Long press MFB 2 seconds until the
call is rejected
Last Number Redialing Feature
Last Number Redialing (While connect-
ed to 1 mobile phone)
Press MFB twice until a prompt “Last
Number Redial”. This will prompt the
redialing of the latest number that was
typed on your call log history.
Last Number Redialing (While connect-
Last Number Redialing (While connect-
ed to 2 mobile phones)
This feature is not applicable to the se-
This feature is not applicable to the se-
cond phone that was paired to the ear-
phone. Only the first device that was
paired will be the one capable of the
Last Number Redialing Feature.
Note: depending on your phone type,
the actual operation may be different.
iPhone Battery Indication
For iPhone users, there will be a Battery
level indicator of the earphone that will
appear on the upper right screen.
Accessories
Micro USB Charging Cable
Ear Tips (6 pieces: 2small, 2medium,
2 large)
WARRANTY CARD
Warranty Period: 12 months from the date
of purchase.
Free Service:
During the warranty period, if there is any
breakdown which caused by the product's
own quality, pls contact your dealer by this
warranty card and purchasing invoice to
enjoy free maintenance.
Free maintain won't be given under the
following circumstance:
1. The damage due to water or drop and the
machinery caused by human.
2. The damage caused by the dismantle
movement of a non-our-company authoriz-
ed maintainer.
3. The breakdown and the damage caused
3. The breakdown and the damage caused
by the Force majeure.
Customer Name
Customer Phone
Customer Address
Product Model
Number
Purchase Date
Dealer
Warranty Date
FCC ID:2AKEZ-Q1
Wireless headset
2APN8-RM8