Справочник Пользователя для Meko Lighting Company Limited RF433M
LED STRIP INSTALLATION
LED STRIP INSTALLATION
Connection to power supply
Note:
6
120VAC 60Hz
E
5a:
5b:
The LED strip and RF receiver is indoor use only.
E
120VAC 60Hz
Warning: Risk of electric
shock. Mount the adapter
at a height greater than
shock. Mount the adapter
at a height greater than
30 cm /
11.8 in. from the
ground surface.
Install the RF receiver
4A
4B
Use the two wire clip to install the RF receiver into desired location.
There are two options for you to choose from:
Remove the protective tape from the adhesive back of the RF receiver carefully, then place the
RF receiver into position and press to ensure a proper adhesion to the surface.
RF receiver into position and press to ensure a proper adhesion to the surface.
Sensor efficiency distance
15 m / 49.2 ft and sensor efficiency angle about 360°.
CAUTION: Only a maximum of 2 x 3.66 m / 12 ft strips can be linked together using the same adapter.
RF Receiver
Note:
5
4A:
4B:
15 m / 49.2 ft
Connect adapter to power outlet
Adapter
LED strip light
RF receiver
5a
5b
°
360
WW
Flash
C
5101 NW 21st Ave, Suite 520, Ft Lauderdale, FL 33309 USA
DSI Customer Service Hotline: 1-800-388-6141 ext. 216 Mon.– Fri., 9:30 a.m. to 3:00 p.m. EST
Customer Service E-mail: CustomerSupport@DSILighting.com
MODEL: DS18124
MADE IN CHINA
Page 8 of 12
5101 NW 21st Ave, Suite 520, Ft Lauderdale, FL 33309 USA
DSI Customer Service Hotline: 1-800-388-6141 ext. 216 Mon.– Fri., 9:30 a.m. to 3:00 p.m. EST
Customer Service E-mail: CustomerSupport@DSILighting.com
MODEL: DS18124
MADE IN CHINA
Page 9 of 12