Справочник Пользователя для MAT GROUP PROTECTIVE TECHNOLOGIES Co. Ltd HF1-2
3
Linking/Pairing
To use the Twiins® HF1.0 Dual + HF2.0 Dual, it’s necessary to pair it to the Bluetooth® device you wish to connect it to (mobile phone, G PS
navigator). While the device is switched off, hold the control button (1b) until the LED indicator (1a) begins flashing in Red and Blue. The
mobile phone or GPS navigator will find the device under the name HF1.0 Dual + HF2.0 Dual. Select the HF1.0 Dual or HF2.0 Dual
device and, if necessary, enter the access code: 0000.
NOTE: Pairing is a process that only needs to be completed once. When the Twiins® HF1.0 Dual + HF2.0 Dual is paired to a specific device,
both devices will connect automatically when switched off and on.
NOTE: Depending on your phone’s Operating System software version, there is a possibility that during the phone’s Bluetooth® device
search you have to turn off the phone’s Bluetooth® functionality and turn on again after 2 or 3 seconds so that the Twiins® device is
found properly. This is normal and it should only happen during the first pairing with that phone.
navigator). While the device is switched off, hold the control button (1b) until the LED indicator (1a) begins flashing in Red and Blue. The
mobile phone or GPS navigator will find the device under the name HF1.0 Dual + HF2.0 Dual. Select the HF1.0 Dual or HF2.0 Dual
device and, if necessary, enter the access code: 0000.
NOTE: Pairing is a process that only needs to be completed once. When the Twiins® HF1.0 Dual + HF2.0 Dual is paired to a specific device,
both devices will connect automatically when switched off and on.
NOTE: Depending on your phone’s Operating System software version, there is a possibility that during the phone’s Bluetooth® device
search you have to turn off the phone’s Bluetooth® functionality and turn on again after 2 or 3 seconds so that the Twiins® device is
found properly. This is normal and it should only happen during the first pairing with that phone.
6“
HF1.0 Dual or HF2.0 Dual
Switching on/off
2“
5“
Switching off: press and hold the control button (1b) for a few seconds until the speakers provides an acoustic signal and the LED
indicator (1a) begins flashing in red before the device powers off.
indicator (1a) begins flashing in red before the device powers off.
Switching on: press and hold the button (1b) for a few seconds until the speakers provides an acoustic signal and the LED indicator
(1a) begins to flash in Blue.
(1a) begins to flash in Blue.