Справочник Пользователя для iMicro Inc. MO-1008BU
please pay attention to the following aspects to prevent the mouse from being used normally in
order to prevent environmental interference.
1 please do not put your mouse or receiver on the metal cupboard or table.
2 in order to prevent interference, please keep the mouse and other RF electronic products at
1.5M distance.
3 do not place your mouse on glass, mirrors and reflective surfaces.
1 please do not put your mouse or receiver on the metal cupboard or table.
2 in order to prevent interference, please keep the mouse and other RF electronic products at
1.5M distance.
3 do not place your mouse on glass, mirrors and reflective surfaces.
Troubleshooting method:
1, the mouse does not work
2, verify that the battery is powered. If there is no electricity, charge the battery according to the
installation.
3, whether the interface between mouse receiver and computer USB is connected well.
4, it may be that the distance between the mouse and the receiver exceeds the working range,
and the mouse can be used close to the receiver.
5, if the ID code is set, please reset the ID code
2, verify that the battery is powered. If there is no electricity, charge the battery according to the
installation.
3, whether the interface between mouse receiver and computer USB is connected well.
4, it may be that the distance between the mouse and the receiver exceeds the working range,
and the mouse can be used close to the receiver.
5, if the ID code is set, please reset the ID code
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
‐‐
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
‐‐
Reorient or relocate the receiving antenna.
‐‐
Increase the separation between the equipment and receiver.
‐‐
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
‐‐
‐‐
Consult the dealer or an experienced radio/TV technician for help.