Справочник Пользователя для HP AF461A
The innovative Minimally Switched Technology used in the HP R5000 UPS improves the performance over traditional line-interactive
UPS designs while reducing the cost, weight, and size of traditional double-conversion online UPS designs. The digital signal
processing (DSP) enables complete digital control of the UPS resulting in increased power conditioning, lower system cost, and
enhanced user interface interactivity.
DSP technology enables the practical implementation of sophisticated UPS topologies and controls. The DSP can simultaneously
control multiple power converters to optimize system efficiency and other performance characteristics such as: enhanced battery
management for extended battery life, and improved output voltage regulation. The result is a higher performance UPS in smaller,
lighter, more reliable designs-an advantage for space-constrained equipment racks and cost conscious, co-located data center
applications.
control multiple power converters to optimize system efficiency and other performance characteristics such as: enhanced battery
management for extended battery life, and improved output voltage regulation. The result is a higher performance UPS in smaller,
lighter, more reliable designs-an advantage for space-constrained equipment racks and cost conscious, co-located data center
applications.
Front View:
Front View:
Front View:
Front View:
Rear View:
Rear View:
Rear View:
Rear View:
1.
Escape Button
1.
ERM connector for the small plug on the split ERM cable
2.
Scroll up button
2.
Load segment 1 circuit breaker (controls the C19 and C13
receptacles, but does not control the large output
receptacle)
receptacles, but does not control the large output
receptacle)
3.
Scroll down button
3.
Load segment 1 (two IEC-320-C19 receptacles, two IEC-
320-C13 receptacles)
320-C13 receptacles)
4.
Enter/Select button
4.
Cord retention clip attachment locations
5.
Power button
5.
Load segment 2 (two IEC-320-C19 receptacles and two
IEC-320-C13 receptacles)
IEC-320-C13 receptacles)
6.
REPO port
7.
USB communications port
8.
Serial communications port
9.
HP UPS Network Module (included)
10.
Ground bonding screw
11.
Input power line cord with NEMA L6-30 plug (NA/JPN) or
IEC-309-32A plug (INTL)
IEC-309-32A plug (INTL)
12.
Load segment 2 circuit breaker
13.
Large output NEMA L6-30R receptacle (NA/JPN) or IEC-
309-32A receptacle (INTL) associated with load segment 1
309-32A receptacle (INTL) associated with load segment 1
14.
ERM Connector for large plug
QuickSpecs
R5000 Uninterruptible Power System (UPS)
R5000 Uninterruptible Power System (UPS)
R5000 Uninterruptible Power System (UPS)
R5000 Uninterruptible Power System (UPS)
Overview
DA - 14109 Worldwide — Version 3 — October 7, 2011
Page 1