Справочник Пользователя для Google GFRG250
•
•
•
•
•
It is normal for your Network Box to get warm, and it needs ventilation to continue functioning properly. Do not block the vents. Your Network Box may
bring cool air in from the bottom and push warm air out the back. To ensure proper airflow, place the Network Box on a solid, unobstructed surface. Do
not place the Network Box on a soft surface, such as a carpeted floor, which may block the airflow.
bring cool air in from the bottom and push warm air out the back. To ensure proper airflow, place the Network Box on a solid, unobstructed surface. Do
not place the Network Box on a soft surface, such as a carpeted floor, which may block the airflow.
WARNINGS:
Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage to the Network Box or your property.
Do not attempt to open or modify the Network Box. If you do so, you run the risk of electric shock or injury. There are no user-serviceable parts
inside the Network Box.
inside the Network Box.
To reduce the risk of fire or electric shock, do not expose Network Box to the outdoors, liquid, moisture, excessive heat, or fire.
Choking hazards
The Network Box packaging may include plastic bags and tie-wraps. Please dispose of these properly and keep them out of reach of children, as they
could present a choking hazard. Keep the Network Box, its cords, and its accessories out of the reach of small children.
could present a choking hazard. Keep the Network Box, its cords, and its accessories out of the reach of small children.
Regulatory compliance information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To satisfy FCC exposure requirements, a separation distance of at least 23 cm should be maintained between the antenna of this device and persons
during device operation. Operations at closer than this distance are not recommended.
during device operation. Operations at closer than this distance are not recommended.
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.