Справочник Пользователя для Antenna International WT-808NBT

Connect the microphone/earphone with the input jack (6).

Make sure 2 AA batteries are inserted in the device (10).
Turn the device on and adjust the volume at appropriate level (3).
Green Tx LED indicator stands for effective transmission (2).

Select advised channel (1).

Green Rx LED indicator means successful receipt of messages from the transmitter (2).
When the LED indicator at position (2) displays in red, please change or recharge batteries (10).

If the battery is exhausted, the LED indicator at position (4) will display in red. Please change or 

recharge batteries immediately (10).

1. Channel selector

2. Tx/Rx/Battery LED indicator

3. Power switch/Volume 

adjustment wheel

4. Battery LED indicator

5. Inbuilt microphone (Tx)

6. Microphone jack (Tx) ; 

Earphone jack (Rx)

7. Audio input jack, 3.5 mm (Tx) ;

 Audio output jack, 3.5 mm (Rx)

8. Group selector

9. Battery compartment

To recharge batteries, place the device in compatible chargers.

10. Charging contacts

11. Battery door

(d) Rear view

(a) Top view

(RECEIVER)

(TRANSMITTER)

(b) Front view

(c) Side view

Audio sources, including mp3, CD players and so on, can be connected with 3.5 mm audio input jacks 

on transmitters for further application (7).
Amplification is available when 3.5 mm audio output jacks on receivers are connected with speakers 
or amplifiers (7).