Справочник Пользователя для Concealite Life Safety Products SS2000
5
Instructions
Power Connections
i
TM
Phone: 605.542.4444
INSTALLATION | Single Wiring Control Wiring Diagram
WARNING: to avoid fire, shock/electrocution, or injury – TURN OFF POWER at circuit breaker or fuse and test to
ensure that power is off before wiring. Remove and discard the packaging materials. Failure to follow published
installation instructions or any modifications to the product may damage the unit and will void the warranty.
ensure that power is off before wiring. Remove and discard the packaging materials. Failure to follow published
installation instructions or any modifications to the product may damage the unit and will void the warranty.
Single Lighting Circuit Control Wiring Diagram
Neutral
Load Output
Line Input Black
Line Black
Load Red
Neutral White
Yellow
Blue
SpaceStation
Occupancy
Sensor
STEP #3: Provide Power Connections
Branch circuit: building power only connections. Provide 120 VAC or 277 VAC uninterrupted power connections to terminate
within the ceiling mounted bracket junction box.
Branch circuit: building power only connections. Provide 120 VAC or 277 VAC uninterrupted power connections to terminate
within the ceiling mounted bracket junction box.
Black - Line Input
White - Neutral
Red - Line Output to Load
Load must not exceed 800 watts @ 120 VAC. Load
must not exceed 1200 watts @ 277 VAC. Loads in
excess must use the Command Module option for
higher wattage.
must not exceed 1200 watts @ 277 VAC. Loads in
excess must use the Command Module option for
higher wattage.
Note: Dimming ballast circuits must be controlled by
the Command Module option.
the Command Module option.
C
Load
Option (RDS)
B
Optional:
Remote Daylight Sensor
Remote Daylight Sensor
Override FDP
Concealed Wall Switch
Concealed Wall Switch
Optional:
A
Option (OR)
A – Optional B – Optional C – Load Information
v.092611–SS