Справочник Пользователя для NEC Corporation of America FOMA-N906IL
28
Voice/Vide
ophone Calls
Enlarging the image to be sent
During a videophone call, you can enlarge the image
of yourself that is sent to the other party.
of yourself that is sent to the other party.
zIf you are sending the image captured by the rear
camera, you can enlarge the image by up to 4
× (in
16 steps). The image shot using the front camera
can be enlarged by up to 2
× (in 2 steps).
zIf you switch between the front and rear cameras
during a videophone call, the respective zoom
settings are retained. When a videophone call
ends, the image reverts to normal scale.
settings are retained. When a videophone call
ends, the image reverts to normal scale.
zYou cannot enlarge the image when you are
sending a substitute image.
1
During a videophone call
X
Press
v to
zoom in or out
Setting the Hands-free
Operation for Videophone
Calls
Operation for Videophone
Calls
<Hands-free switch>
You can set the FOMA terminal to switch to handsfree
mode automatically when starting a videophone call.
mode automatically when starting a videophone call.
1
Videophone settings screen
(p.26)
(p.26)
X
“Hands-free switch”
X
“ON”
■ Not to switch the mode
X
“OFF”
■ To cancel the handsfree mode during a
videophone call
X
o (
)
Setting the Image Displayed
During a Videophone Call
During a Videophone Call
Setting the image to be displayed on
the main screen and how to display a
camera image
the main screen and how to display a
camera image
<Display setting>
You can set the image displayed on the main display
or how to display your own camera image.
or how to display your own camera image.
1
Videophone settings screen
(p.26)
(p.26)
X
“Display setting”
X
Select any
item:
Main display
……Selects the main display for the
videophone call from “Other side”/“My side”. “Other
side” displays the camera image of the other party
and “My side” displays your own camera image on
the main display.
side” displays the camera image of the other party
and “My side” displays your own camera image on
the main display.
Front camera Reverse
……Sets whether to display
your camera image as a mirror image (ON) or
normal image (OFF) on the FOMA terminal during a
call.
normal image (OFF) on the FOMA terminal during a
call.
Decorating the videophone screen
<Decoration>
<Decoration>
You can decorate the videophone screen (image from
your own camera) with stamps or frames.
your own camera) with stamps or frames.
1
Videophone in-call screen (p.2)
X
u
(FUNC)
X
“Decoration”
X
Select any
item:
Frame
……Selects a frame.
Stamp
……Selects a stamp and sets the position to
paste.
■To remove a frame or stamp
Select “OFF decoration” from the function menu of
the videophone in-call screen.
Select “OFF decoration” from the function menu of
the videophone in-call screen.
N
z The FOMA terminal does not switch to handsfree
mode automatically in the following cases even when
“Hands-free switch” is set to “ON”:
“Hands-free switch” is set to “ON”:
• While Manner mode is set
• When a flat-plug earphone/microphone with switch
• When a flat-plug earphone/microphone with switch
(optional) is connected (however, the microphone
operation follows the “Select microphone” setting)
operation follows the “Select microphone” setting)
• When holding a call or Record message is activated
for the incoming call
N
z When “Front camera Reverse” is set to “OFF”, an
image is displayed in normal display, and you can read
stamps such as characters correctly.
stamps such as characters correctly.