Справочник Пользователя для NEC Corporation of America KMP6J1N1
Repeat the voice tag or name the same as the first time. If holding the wireless phone to your ear, you will hear what you have
said.
said.
If a match is obtained, the voice set confirmation screen “Voice set” displays briefly and the Edit screen displays with the Voice
field ‘Set.’
If a match is not obtained from the two sample recordings, the fail screen displays the message, “Recordings didn’t match. Say
name again.”
name again.”
Repeat the voice tag or name again. If a match is obtained, the confirmation screen displays “Voice set.”
If a match is not obtained from the three sample recordings, the fail screen briefly displays the message, “Voice not recorded.
Samples are too different.” Press Softkey 1 (OK) and the Voice tag menu returns.
Samples are too different.” Press Softkey 1 (OK) and the Voice tag menu returns.
Repeat the recording process or press CLR (Clear/Back) to return to the Edit screen.
Continue with “Allocate a Backlight Color” instructions or if finished adding/editing the fields, press Softkey 1 (OK) and return
to the screen where you started the add/edit process.
to the screen where you started the add/edit process.
A voice tag may be allocated to only 10 entries in the phone memory and none in the SIM memory. Refer to page 84 for instructions
using a voice tag.
using a voice tag.
Allocate Backlight Color
A color may be selected to flash on the second display backlight when the person of the phone entry calls your wireless phone. The
backlight color may be allocated by cycling through the backlight field or at the 2nd-LCD screen.
backlight color may be allocated by cycling through the backlight field or at the 2nd-LCD screen.
To allocate a color in the backlight field:
*
Press
(Up) or
(Down) navigation key to highlight the
backlight field.
Press
(Left) or
(Right) navigation key to cycle the available colors.
Continue with “Allocate a Phonebook Picture” instructions or if finished adding/editing the fields, press Softkey 1 (OK) and
return to the screen where you started the add/edit process.
return to the screen where you started the add/edit process.
To allocate a backlight color from the 2nd-LCD screen.
*
Press
(Up) or
(Down) navigation key to highlight the
backlight field and press
(Select) to display the color list on
the 2nd-LCD screen.
Input a number 1 to 7 that corresponds to the preferred color or press
(Up) or
(Down) navigation key to highlight the
preferred color and press
(Select/Save) to select the backlight color and display the Edit screen with the color stated in the
backlight field.
Continue with “Allocate a Phonebook Picture” instructions or if finished adding/editing the fields, press Softkey 1 (OK) and
return to the screen where you started the add/edit process.
return to the screen where you started the add/edit process.
72