Справочник Пользователя для NEC Corporation of America TRM7762
13
Continued on next page
Voice/Vide
ophone Calls
■ To transmit all dialing data at once
j (1 second or longer) “Send at one time”
It may not be possible to send all the data at
once to some recipients.
once to some recipients.
Using the Prefix Function
Store prefix numbers such as IDD Prefix code and
186/184 for showing/hiding your caller ID beforehand
and add these prefix numbers when you make calls.
186/184 for showing/hiding your caller ID beforehand
and add these prefix numbers when you make calls.
Storing prefix numbers
<Prefix setting>
z Up to 7 prefix numbers can be stored.
z You can enter characters from 0 to 9, #, * and +.
z You can enter characters from 0 to 9, #, * and +.
1
[MENU] “TEL function”
“Dial/Receive setting” “Dial call
setting” “Prefix setting”
“Dial/Receive setting” “Dial call
setting” “Prefix setting”
■ To delete prefix numbers
[MENU] (Submenu) Select a deletion method
2
Highlight an item to store or
change [
change [
C] (Edit)
3
Enter a name
4
Enter a number (prefix)
You can enter up to 10 digits.
Making a call with a prefix number
<Prefix numbers>
z You can add prefix numbers on the “Enter phone
number” screen and the detail screen of
“Phonebook”, “Received calls”, “Dialed calls” or
“Redial”.
“Phonebook”, “Received calls”, “Dialed calls” or
“Redial”.
<Example: To make a voice call by adding a prefix
number on the enter phone number screen>
number on the enter phone number screen>
1
Enter the phone number of the
other party
other party
2
[MENU] (Submenu) “Prefix
numbers” Select a stored
name r
numbers” Select a stored
name r
Making a Call Specifying a
Sub-Address
Sub-Address
<Sub-address setting>
Set whether to specify “*” in the phone number as a
separator so that the digits following “*” are
recognized as a sub-address (ON or OFF).
separator so that the digits following “*” are
recognized as a sub-address (ON or OFF).
z Sub-addresses are used in ISDN to identify calls
made from specific communications devices and to
select content in “V-live”.
select content in “V-live”.
1
[MENU] “TEL function”
“Dial/Receive setting” “Dial call
setting” “Sub-address setting”
“Dial/Receive setting” “Dial call
setting” “Sub-address setting”
“ON” or “OFF”
Setting the Alarm for
Reconnection
Reconnection
<Reconnect signal>
When the signal quality deteriorates during a FOMA
voice/videophone call and the call disconnects, the
FOMA terminal will automatically reconnect the call if
the signal quality quickly improves. Set the type of
alarm when a call is reconnected.
voice/videophone call and the call disconnects, the
FOMA terminal will automatically reconnect the call if
the signal quality quickly improves. Set the type of
alarm when a call is reconnected.
z The time required for reconnection varies
depending on communication conditions or the
signal quality. It takes about 10 seconds.
signal quality. It takes about 10 seconds.
1
[MENU] “TEL function”
“Dial/Receive setting” “In-call
setting” “Reconnect signal”
Select an alarm tone
“Dial/Receive setting” “In-call
setting” “Reconnect signal”
Select an alarm tone
Select “No tone”, “High tone” or “Low tone”.
N
z
Some phones may be unable to receive push
signals.
signals.
N
z
In the following cases, “*” does not function as a
sub-address separator. The number including “*”
is recognized as an ordinary phone number.
sub-address separator. The number including “*”
is recognized as an ordinary phone number.
• When “*” is entered at the beginning of a phone
number
• When “*” immediately follows “186” or “184” at
the beginning of a phone number
• When “*” immediately follows a number
entered using “Prefix numbers”
• When the phone number contains “*590#”,
“*591#” or “*592#”
N
z
Call charges also apply until reconnected (up to
about 10 seconds).
about 10 seconds).