Справочник Пользователя для Motorola Solutions Inc. 99FT4097

NOTICE: The example given in this Appendix applies for a UHF band system. For different
frequency bands, applicable band-specific parameters should be employed to carry out the
computations yielding band-specific compliance boundaries.

The Electromagnetic Energy (EME) compliance boundaries in a typical system configuration of the
MOTOTRBO SLR 5000 Series Repeater described in the following are derived.

Compliance is established with respect to the applicable limits defined in the ICNIRP guidelines [1], the
United States regulations [2]-[3], and in the CENELEC Standards EN50384:2002 [5] and
EN50385:2002 [6]. These standards and regulations apply to occupational and general public EME
exposure.

The assessment was carried out using a computational method described in the CENELEC Standard
EN50383:2010 [4], which is referenced by the EN50385:2002, and this report has been drafted in
accordance with its requirements. Thus the assessment and report address the European Radio and
Telecommunications Terminal Equipment (R&TTE) Directive requirements concerning EME exposure.

The following table provides the compliance distances for general public and occupational-type
exposure, for the UHF frequency band, antenna, and parameters considered in this analysis, based on
a typical system configuration:

Table 44: EME Compliance Distances Based on Example UHF Evaluation

General public exposure

6.9 m

Always compliant

Occupational-type exposure

2.15 m

Always compliant

MN001436A01-AD

Appendix F: MOTOTRBO Repeater – EME ASSESSMENT

  155