Справочник Пользователя для SANYO Electric Co. Ltd. PBS-CS47
8
Notes at the time of
lid opening and closing
lid opening and closing
]
Opening
\
After loosening all lid’s fixation screws completely, pull
upper part and central screw of the lid, and slide. (Photo1)
upper part and central screw of the lid, and slide. (Photo1)
\
Confirm that all screws are free completely and two pins of
the lid is at the right edge of two metal fittings ,therefore
rotate the lid while pulling in the direction”an arrow” like
below . (Photo2)
the lid is at the right edge of two metal fittings ,therefore
rotate the lid while pulling in the direction”an arrow” like
below . (Photo2)
]
Closing
\
Tightening torque of Cap screw: 10 - 15 Kgf-cm
\
Tighten with M4 hexagon Socket Cap screws. (Cap screw).
\
Tighten 6 screws equally and well balanced, after confirming
that the waterproof packing is nonexistent between the lid
and the CS.
that the waterproof packing is nonexistent between the lid
and the CS.
[Caution] If the clamp face or waterproof packing is scarred by
screw’s cusp, the waterproof performance may not be
obtained
obtained
(Photo1)
(Photo2)