Справочник Пользователя для ICOM 217800

8

1

PANEL DESCRIPTION

$6

➥Pushing a key selects the operating band.

• [GENE•] selects the general coverage band.

➥Pushing the same key 2 or 3 times calls up other

stacked frequencies in the band. (p. 24)

• Icom’s triple band stacking register memorizes 3 fre-

quencies in each band.

➥After pushing [(F-INP)ENT], enters a keyed fre-

quency or memory channel. Pushing [(F-
INP)ENT] or [Y]/[Z] is necessary at the end.
(pgs. 25, 76)

• e.g. to enter 14.195 MHz, push [(F-INP)ENT] [1] [4]

[•] [1] [9] [5] [(F-INP)ENT].

$7

(p. 81)

Programs the selected readout frequency and op-
erating mode into a memo pad.

• The 5 most recent entries remain in memo pads.
• The transmit frequency is programmed when pushed to-

gether with [XFC].

• The memo pad capacity can be expanded from 5 to 10

in set mode for your convenience. (p. 101)

$8

(p. 70)

➥Turns the split function ON and OFF when

pushed.

➥Turns the split function ON, equalizes the sub

readout frequency to the main readout and sets
the sub readout for frequency input when pushed
for 1 sec. in non-FM modes. 

(Quick split function)

• The offset frequency is shifted from the main readout

frequency in FM mode. (pgs. 52, 99)

• The quick split function can be turned OFF using set

mode. (p. 98)

➥Turns the split function ON and shifts the sub

readout frequency after inputting an offset
(±4 MHz in 1 kHz steps).

$9

(p. 63)

➥Turns the dualwatch function ON and OFF when

pushed.

➥Turns the dualwatch function ON and equalizes

the sub readout frequency to the main readout
when pushed for 1 sec. 

(Quick dualwatch function)

• The quick dualwatch function can be turned OFF

using set mode. (p. 98)

%0

➥Switches the frequency and selected memory

channel between main and sub readouts when
pushed.

• Switches between transmit frequency and receive fre-

quency when the split frequency function is ON.
(p. 70

➥Equalizes the sub readout frequency to the main

readout frequency when pushed for 1 sec.

%1

➥Switches the selected readout operating mode

between the VFO mode and memory mode when
pushed. (pgs. 23, 76)

➥Transfers the memory contents to VFO when

pushed for 1 sec. (p. 79)

%2

➥Push momentarilly to select access to the main

or sub readout. 

• The sub readout frequency is displayed in outline or

mesh font. The sub readout functions only during split
operation or dualwatch.

➥Push for 1 sec. to turn the mini spectrum scope

screen indication ON and OFF. 

• The mini spectrum scope screen can be indicated

with another screen, such as memory, set mode
screen, simultaneously.

%3

(See p. 9 for details.)

Shows the operating frequency, function switch
menus, spectrum scope screen, memory channel
screen, set mode settings, etc.