Справочник Пользователя для ICOM 268100
20
4
BIIS OPERATION
4
19
4
BIIS OPERATION
■ Default setting
The following functions are assigned to each programmable switch
as the default. Ask your dealer for details.
as the default. Ask your dealer for details.
[P0]; Call
: Push to transmit a 5-tone/BIIS call when the
selected channel is a 5-tone or MSK channel,
respectively.
respectively.
[P1]; Digital
: Push to select the call list ID/transmit mes-
sage, or to display the receive message
record for selection.
record for selection.
[P3]; Moni(Audi)
: Pushing this key after the communication to
send a “clear down” signal during MSK chan-
nel operation.
nel operation.
[
]/[
]; CH Down/Up
: During standby condition, selects the operat-
ing channel.
After pushing [Digital] or [TX Code CH Se-
lect], selects call list or TX code channel, re-
spectively.
spectively.
[P2]/[Red]; Null
: No function is assigned.
■ Receiving a call
D
D Individual call
q When an individual call is received;
• Beeps sound.
• “
• “
” appears and the mute is released.
• The programmed text message (e.g.“
”) and the calling
station ID (or text) is displayed alternately, depending on the set-
ting.
ting.
• “
” appears or blinks depending on the setting.
w Push and hold [PTT], then speak into the microphone at a nor-
mal voice level.
• Transmit/Busy indicator lights red.
e Release [PTT] to return to receive.
• Transmit/Busy indicator lights green while receiving a signal.
r To finish the conversation, push [P3] (Moni(Audi)) to send the
“Clear down” signal.
• Either station can be send.
• “
• “
” is displayed for 2 sec. (approx.).
• “
” disappears and the transceiver returns to standby condition.
Appears or blinks
Appears
!IC-F50_F60 BIIS.qxd 03.9.3 1:38 PM Page 19 (1,1)