Справочник Пользователя для ICOM 268100

BATTERY CHARGING

■ Optional battery case

When using the optional battery case attached to the transceiver,
install 5

× AA (R6) size alkaline batteries as illustrated at right. The

BP-226 meets JIS waterproof specification grade 4.

q Hook your finger under the latch, and open the cover in the direc-

tion of the arrow (

q). (Fig.1)

w Then, install 5

× AA (R6) size alkaline batteries. (Fig.2)

• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Do not pin the ribbon under the batteries.

e Close the cover with fitting in the direction of the arrow (

w) first,

then check the latch is in place (

e). (Fig.1)

• Be sure to the gasket and the ribbon are set correctly.

Do not protrude out from the battery case. (Fig.3)

CAUTION:

• When installing batteries, make sure they are all the same

brand, type and capacity. Also, do not mix new and old batter-
ies together.

• Keep battery contacts clean. It’s a good idea to clean battery

terminals once a week.

BP-226

Latch

Fig.1

Fig.2

Ribbon

Fig.3

Gasket

Ribbon

!IC-F50_F60 BIIS.qxd 03.9.3 1:38 PM Page 43 (1,1)