Справочник Пользователя для ICOM 272102
17
6
CONVENTIONAL OPERATION
■ Emergency transmission
When [Emergency], [Emergency Single] or [Emergency
Repeat] is pushed, an emergency signal is automatically
transmitted for the specified time period.
Repeat] is pushed, an emergency signal is automatically
transmitted for the specified time period.
When [Emergency] is pushed, the DTMF emergency signal
is transmitted on the priority channel.
is transmitted on the priority channel.
When [Emergency Single] or [Emergency Repeat] is
pushed for the specified time period, the DTMF emergency
signal is transmitted once or repeatedly on the emergency
channel. However, when no emergency channel is specified,
the signal is transmitted on the previously selected channel.
pushed for the specified time period, the DTMF emergency
signal is transmitted once or repeatedly on the emergency
channel. However, when no emergency channel is specified,
the signal is transmitted on the previously selected channel.
■ Scrambler function
The voice scrambler function provides private communication
between stations. The frequency inversion type is equipped
to all versions, moreover, the optional Rolling or Non-rolling
type can be available.
between stations. The frequency inversion type is equipped
to all versions, moreover, the optional Rolling or Non-rolling
type can be available.
q Push [Scrambler] to turn the scrambler function ON.
• “
” appears.
w Push [Scrambler] again to turn the scrambler function
OFF.
• “
” disappears.
■ Stun function
When the specified code, set as a stun code, is received, the
stun function will be activated. When the stun code is
received, “STUNNED” appears on the display and the trans-
ceiver cannot be used. To use the transceiver, the stun
release code must be received.
Also, if the transceiver’s running time exceeds the preset run-
ning time limit, the transceiver cannot be used. To use the
transceiver, extend the running time limit or turn the Run Time
Limit function OFF using the CS-F43TR
stun function will be activated. When the stun code is
received, “STUNNED” appears on the display and the trans-
ceiver cannot be used. To use the transceiver, the stun
release code must be received.
Also, if the transceiver’s running time exceeds the preset run-
ning time limit, the transceiver cannot be used. To use the
transceiver, extend the running time limit or turn the Run Time
Limit function OFF using the CS-F43TR
CLONING SOFTWARE
.
■ Man Down transmission
When the optional UT-113
MAN DOWN UNIT
is installed, the
Man Down function can be used. The Man Down function
transmits a man down emergency call after the specified time
period has passed with the transceiver in a horizontal posi-
tion.
transmits a man down emergency call after the specified time
period has passed with the transceiver in a horizontal posi-
tion.
!IC-F43TR.qxd 04.1.14 7:03 PM Page 17 (1,1)