Справочник Пользователя для ICOM 288800

7

2

PANEL DESCRIPTION

➥ “S” appears with the “DSQL” or “CSQL” indicator

while the pocket beep function 

(with sigita call sign or dig-

ital code squelch)

is in use. (p. 111)

tKEY LOCK INDICATOR (pgs. 25, 115)

Appears when the key lock function is activated.

yAUTO POWER OFF INDICATOR (p. 88)

Appears when the auto power OFF function is in use.

uEMR MODE INDICATOR (p. 56)

Appears when the EMR mode operation is selected.

iFREQUENCY READOUT 

Displays a variety of information, such as an operating fre-
quency, set mode contents, memory names.

• The decimal point blinks during scan.

oSKIP INDICATORS (pgs. 79, 80)

➥ “SKIP” appears when the selected memory channel is

set as a skip channel.

➥ “P SKIP” appears when the displayed frequency is set

as a skip frequency.

!0MEMORY CHANNEL NUMBER INDICATOR 

➥ Shows the selected memory channel number. (pgs. 64,

65)

➥ “C” appears when the call channel is selected. (pgs. 16,

65)

➥ “WX” appears when the weather channel is selected.

(pgs. 16, 116)

➥ “TV” appears when the TV channel is selected.

(pgs. 16, 28)

!1S/RF METER

➥ Shows the relative signal strength while receiving sig-

nals. 

➥ Shows the output power level while transmitting. (p. 24)

!2ATTENUATOR INDICATOR (p. 22)

Appears when the RF attenuator is in use.

!3LOW POWER INDICATOR (p. 24)

➥ “LOW” appears when the low power is selected.

➥ No indicator appears when the high power is selected.

!4MEMORY INDICATOR (p. 64)

Appears when memory mode is selected.

!5NAME INDICATOR (p. 70)

During memory mode operation, the programmed memory
or memory bank name is displayed.

!6MAIN BAND INDICATOR (p. 14)

Shows which operating band, “A” or “B,” is selected for the
main band.

!7OPERATING MODE INDICATOR (p. 21)

Shows the selected operating mode.

• DV, FM, FM-N, WFM and AM are available, depending on oper-

ating band.

!8SIMPLE BAND SCOPE INDICATOR (p. 23)

When the simple band scope function is in used, shows
the band conditions.