Справочник Пользователя для ICOM 291400

PANEL DESCRIPTION

New2001

u CHANNEL SELECTOR [DIAL•ENTER]

➥ Rotate to select the operating channels, Set mode set-

tings, etc. (pgs. 6, 7, 55)

➥ While pushing and holding [H/L], rotate to adjust the

brightness of the LCD and key backlight. (p. 10)

➥ Push to enter the input channel comment, selected

item, etc. (pgs. 10, 55)

➥ Rotate to check TAG channels, changes scanning di-

rection or resumes the scan manually during scan.
(p. 13)

➥ While pushing and holding [PA•RX ], rotate to adjust

the audio level in RX Speaker mode. (p. 51)

i CHANNEL/WEATHER CHANNEL KEY

[CH/WX•DUAL•U/I/C]
➥ Selects and toggles the regular channel and Weather

channel when pushed momentarily. (p. 7)

➥ Push and hold for 1 sec. to start Dualwatch or Tri-watch.

(p. 14)

➥ Push to stop Dualwatch or Tri-watch when either is acti-

vated. (p. 14)

➥ Move the cursor backward while in the channel com-

ment programming condition. (p. 10)

➥ While pushing and holding [H/L], push to select one of

three channel groups in sequence. (p. 7)

• U.S.A., International and Canadian channels are available.

o SQUELCH CONTROL [SQL]

Rotate to set the squelch threshold level. (p. 8)

!0 SCAN KEY [SCAN•TAG] (p. 13)

➥ Push to start and stop Normal or Priority scan.

➥ Push and hold for 1 sec. to set or clear the displayed

channel as a TAG (scanned) channel.

➥ While pushing and holding [H/L], push for 3 sec. to

clear or set all TAG channels in the selected channel
group.

!1 VOLUME CONTROL [VOL] (p. 8)

Rotate to adjust the audio level.

!2 TRANSMIT POWER KEY [H/L]

➥ Push to toggle the power high or low. (p. 8)

• Some channels are set to low power only.

➥ While pushing this key, some keys perform secondary

functions.

!3 POWER KEY [POWER] (p. 8)

➥ Push to turn power ON.

➥ Push and hold for 1 sec. to turn power OFF.

!IC-M504.qxd 05.12.28 11:29 AM Page 3 (1,1)