Справочник Пользователя для ICOM 297000

35

4

REPEATER OPERATION

The U.S.A. and Korean versions automatically use standard
repeater settings 

(duplex ON/OFF, duplex direction, tone encoder

ON/OFF)

when the operating frequency falls within or outside

of the general repeater output frequency range. The offset
and repeater tone frequencies are not changed by the auto
repeater function, reset these frequencies, if necessary.

D Frequency range and offset direction

q Push [F•

] to display the function guide.

w Push [MENU](V/MHz•SCAN)

(Right band’s)

to enter MENU

screen.

e Rotate  [DIAL] to select “SET MODE” then push

[MAIN•BAND].

r Rotate [DIAL] to select “AUTO REPEATER” then push

[MAIN•BAND].

t Rotate [DIAL] to select the auto repeater setting.

• “ON1” : Activates duplex only. (default)
• “ON2” : Activates duplex and tone.
• “OFF” : Auto repeater function is turned OFF.

• “ON”

: Activates duplex and tone. (default)

• “OFF” : Auto repeater function is turned OFF.

y Push [BACK](V/MHz•SCAN) 

(Right band’s)

twice to exit

from set mode.

Auto Repeater set: ON1
(USA version)

439.000–440.000 MHz

“DUP–” appears

147.000–147.395 MHz

“DUP+” appears

442.000–444.995 MHz

“DUP+” appears

447.000–449.995 MHz

“DUP–” appears

145.200–145.495 MHz
146.610–146.995 MHz

“DUP–” appears

■ Auto repeater