Справочник Пользователя для ICOM 297000

PRIORITY WATCH

■ Priority watch operation

q Select VFO mode; then, set an operating frequency in the

desired MAIN band (left or right).

w Set the watching channel(s).

For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push the same band’s
[V/MHz•SCAN] for 1 sec. to start memory scan.
For call channel watch:
Select the desired call channel by pushing the same
band’s [M/CALL•MW] once or twice, then rotate the
[DIAL].

e Push and hold [LOW•PRIO] for 1 sec. to start the watch.

• The transceiver checks the memory or call channel every 5 sec.
• The watch resumes according to the selected scan resume con-

dition. (p. ??)

r Push and hold [LOW•PRIO] for 1 sec. to stop the watch.

z Select VFO mode; then, set the desired fre-

quency.

x Set the watching channel(s).

For memory channel watch:
Push [MR/CALL] then [Y] or [Z] to select the de-
sired memory channel.
For memory scan watch:
Push [MR/CALL], then push [

SCAN

2] to start the

memory scan.
For call channel watch:
Push [MR/CALL] for 1 sec. then push [Y] or [Z]
to select the call channel.

c Push [

PRIO

3(PTT-M)] to start the watch.

• The transceiver checks the memory or call channel

every 5 sec.

• The watch resumes according to the selected scan re-

sume condition. (p. 45)

• To resume the watch manually when paused, push

[

PRIO

3(PTT-M)] or [

CLR

A(MW)].

v To stop the watch, push [

CLR

A(MW)] once (or

twice while watch is paused).

PRIO