Справочник Пользователя для ICOM 305400

13

6

n

The 9-digit MMSI (Maritime Mobile Service Identity: DSC 
self ID) code can be programmed at power ON.

This function is not available when the MMSI code has 
been programmed by the dealer. This code programming 
can be performed only twice.

q 

 Turn OFF the power.

w 

 While holding down 

[MMSI](MENU), turn ON the power 

to enter MMSI code programming mode.

e

  After the display appears, release 

[MMSI](MENU).

r 

 Push 

[MENU] to enter the DSC menu.

t 

 Push 

[Y] or [Z] to select “MMSI” and push [ENT].

 • A cursor starts blinking.

y 

Push 

[Y] or [Z] to select the specified MMSI code.

 • Push

[CH/WX] or [16] to move the cursor forward or backward.

u 

After programming the 9-digit MMSI code, push 

[ENT].

 • “CONFIRMATION” scrolls at the channel comment indicator.

Scrolls

i  

Push 

[ENT], then input the same MMSI code as step y 

for the confirmation.

o  

Push 

[ENT] to set the code.

 • Returns to the normal operation.
 • Push

[CLR] to cancel and exit the programming mode.

 • If the different code is input, “INCORRECT” appears. Push 

[ENT] and try steps y to i again.

D MMSI code check

The 9-digit MMSI (DSC self ID) code can be checked.

➥

Hold down 

[MMSI](MENU) for 1 second to display the 

9-digit MMSI (DSC self ID) code.

 • The MMSI code is displayed and scrolls at the channel com-

ment indicator.

 • When no MMSI code is programmed, “NO MMSI” appears and

warning alarm sounds.

Scrolls