Справочник Пользователя для ICOM 305400

New2001

No sound from speaker. • Squelch level is too high.

• Volume level is too low.
• Speaker has been exposed to water.

p. 7
p. 7
p. 9

• Set

[SQL] to the threshold point.

• Set

[VOL] to a suitable level.

• Drain water from the speaker.

The transceiver does 
not turn ON.

• Bad connection to the power supply.

p. 44

• Check the connection to the transceiver.

Transmitting is impos-
sible, or high power can 
not be selected.

• Some channels are for low power or re-

ceive only.

• The output power is set to low.

pp. 5, 6, 
52
p. 7

• Change channels.

• Push

[HI/LO] on the microphone to select 

high power.

Scan does not start.

• TAG channel is not programmed.

• Set a desired channels as TAG channels.

p. 11

No beeps.

• Beep tones are turned OFF.

• Turn the beep tone ON in the Set mode.

p. 42

Distress call cannot be 
transmitted.

• MMSI  (DSC  self  ID)  code  is  not  pro-

grammed.

• Program the MMSI (DSC self ID) code.

p. 13

52

New2001

9