Справочник Пользователя для ICOM 307701

2

1

PANEL DESCRIPTION

r

 

10-KEYPAD (10-key type only)

 

The keypad allows you to enter digits to:

  •  Select memory channels, tone channels and DTMF codes 

(when in the DTMF code channel selection mode)

  • Start up with a password
  •  Input the Individual ID code for digital operation. (Depending on 

the pre-setting)

t

 

 

Lights green while receiving a signal, or when the squelch 
is open.

y

Push to turn the power ON and OFF.

  • The following functions are available at power ON as options:
    - Automatic scan start
    - Password prompt
    - Set mode

u

 

Lights red while transmitting.

i

 

Desired functions can be programmed independently by 
your dealer. (p. 4)

 

In this instruction manual, these keys are from the left, 
called [P0]/[P1]/[P2]/[P3]/[P4].

o

Connect the supplied or optional microphone.

  •  When you connect a microphone, be sure to fit the connector 

cover of the microphone into the connector to maintain the front 
panel’s dust protection and splash resistance*.

    *Only when the optional RMK-2 is attached.

Connector cover

RMK-2

 

 

NEVER connect non-specified microphones. The pin 
assignments may be different and the transceiver may 
be damaged.

D  MICROPHONE
   The supplied microphone has a PTT switch and a hanger 

hook.

  •  The following functions are available when the microphone is 

on or off hook (depending on the setting):

  - Automatic scan starts when it is on hook.
  - Scan is cancelled when it is off hook.
  - Scan is paused when it is off hook.
  - Automatic priority channel selection is available when it is off hook.
  - Sets to ‘Inaudible’ condition (mute condition) when it is on hook.
  - Sets to ‘Audible’ condition (unmute condition) when it is off hook.