Справочник Пользователя для ICOM 318200

94

12

N

Icom strongly suggests that the customer have their 
dealer or Icom distributor, for a reasonable fee, in-
stall Icom options at the time of the order. Icom un-
derstands that even the simplest of installations de-
mands the judgment of a trained Icom technician. 
Therefore, Icom will not be responsible for damage 
to the optional unit, or subsequent damage to the 
transceiver due to user installation problems. The 
option’s or the transceiver’s Warranty can be voided 
in such situations, at the sole judgment of Icom.

For those customers who still wish to install their 
own options, knowing the risks and possible con-
sequences, the following information is provided for 
information purposes only.

The following are instructions for removing the covers 
of the IC-7410.

R

q  Remove the two screws from the carrying handle 

and remove it from the transceiver.

w  Remove the seven screws from the top of the trans-

ceiver and the six screws from the sides, then lift up 
the top cover.

e Turn the transceiver upside-down.
 

r  Remove the six screws from the bottom, and then 

lift off the bottom cover.

 About the leg pads
To detach the leg pads from the right side panel of 
the top/bottom cover, push them out from the inside 
of each cover, after completing steps 

q through r 

above.

Carrying handle

Bottom cover

Top cover

PA shielding 
plate

Top

Bottom

Rear

Front