Справочник Пользователя для ICOM 318200

67

6

FUNCTIONS FOR TRANSMIT

N

When you hold down [SPLIT] for 1 second, the Split 
frequency operation is turned ON. The undisplayed 
VFO is automatically changed according to the plus/
minus frequency shift programmed in the Set mode, or 
equalized when 0 kHz (default setting) is programmed 
as the split frequency shift. (p. 86)

The Quick Split function is ON by default. For your 
convenience, it can be turned OFF in the Set mode. 
(p. 86) In this case, holding down [SPLIT] does not 
equalize the VFO A and VFO B frequencies.

q  Suppose you are operating at 21.290 MHz (USB) in 

VFO A.

w Hold down [SPLIT] for 1 second.

s

s

ceive frequency (VFO A).

s

from the receive frequency (VFO A) according to the 
“FM SPLIT Offset HF” and “FM SPLIT Offset 50” setting 
in the Set mode.

s

cally turned ON.

e  While holding down [XFC], rotate [DIAL] to set the 

transmit frequency.

s

s

page for details.

D

The Split Lock function is convenient for changing only 
the transmit frequency. When the Split Lock function is 
not used, accidentally releasing [XFC] while rotating 
[DIAL], changes the receive frequency.
The Split Lock function is OFF by default. Set the 
“SPLIT LOCK” item to “ON” in the Set mode. (p. 86)

q  While split frequency operation is ON, push [LOCK] 

to turn ON the Split Lock function.

s

” appears.

w  While holding down [XFC], rotate [DIAL] to change 

the transmit frequency.

s

[DIAL], the receive frequency does NOT change.

Appears

Shows the equalized transmit (VFO B) frequency

[XFC]

[DIAL]

[SPLIT]

A G C

T B W

S C P

M 1

[XFC]

[DIAL]

[LOCK]