Справочник Пользователя для ICOM 318200

87

SET MODE

10

Whenever you push [PTT], the internal or external an-
tenna tuner automatically starts tuning if the operating 
FREQUENCY

s

you push [PTT] on a new frequency, if the in-
ternal antenna tuner is ON.

 

 

   (External antenna tuner) Tuning always starts 

when you push [PTT] on a new frequency, re-
gardless of whether the external antenna tuner 
is ON or OFF.

Select the desired antenna.
The selected antenna’s preset memory* is cleared by 
holding down [CLR](F-4) for 1 second.

* The variable capacitor settings are memorized as a 

preset point for each frequency range (100 kHz steps) 
after the tuner matches an antenna.

s

is cleared.

s

is cleared.

Set the antenna switch function to Auto, Manual or OFF.
When you change the operating frequency, this func-
tion will automatically select the correct antenna, or you 
must do it manually.

s

[ANT1] connector is always selected.

s

PUSHING

s

ory is automatically selected. You can also 
manually change the antenna by pushing 
;!.4s-%4%2=

Adjust the speech audio output level to between 0 (no 
output) and 100 (maximum output).

Select English or Japanese as the speech language.

Select HIGH (faster) or LOW (slower) speech speed.

The signal level announcement with the voice synthe-
sizer can be turned ON or OFF.

s

frequency is announced.

s

are announced.

Turn the Operating Mode Speech function ON or 
OFF.
When this function is ON, the selected operating mode 
is verbally announced when a mode switch is pushed.

s

Set the number of available memo pads to 5 or 10.
See page 74 for details.

Set the Auto Tuning Step function for [DIAL]. When 
rapidly rotating [DIAL], the tuning step automatically 
changes as selected.

There are two types of auto tuning steps: LOW (Faster) 
and HIGH (Fastest).

s

step is set to 1 kHz or smaller steps; approxi-
mately 2 times faster when the tuning step is 
set to 5 kHz or larger steps.

N Set mode description (Continued)