Справочник Пользователя для ICOM 325100

28

6

CALL CHANNEL OPERATION

■ Programming a Call channel

Operating frequency, duplex setting, subaudible tone 
setting (tone encoder or tone squelch ON/OFF and 
its frequency) and channel names can be also pro-
grammed into the Call channel.

q  Push [V/MH  z] to select the VFO mode, and set the 

desired frequency.

w Push [MW] (S.MW).

e Rotate [DIAL] to select the Call channel
 • 

The 

“

” icon and “C” blink.

r Hold down [MW] (S.MW) for 1 second
 • 

 

3 beeps sound, and then the transceiver automati-
cally returns to the VFO mode.

z  Set the desired frequency in the VFO mode.

  ➥  Push [VFO] to select the VFO mode.

  ➥ Set the frequency.

  ➥ Set other data as desired.

x  Push [FUNC] 

, and then [MW] 

.

c Push [Y] or [Z] to select the Call channel.

v  Push [FUNC] 

 then [MW] 

 for 1 second to pro-

gram.

 • 

 

3 beeps sound, and then the transceiver automati-
cally returns to the VFO mode.

Push          then hold down          for 1 second. 

Push                                                    to set the frequency.

Push         to select the VFO mode.

Push       , and then push        .

Push           /           until large “C” appears.

Hold down [MW] (S.MW) for 1 second. 

Rotate [DIAL] to set the frequency.

Push [V/MHz] to select the VFO mode.

Push [M/CALL], and then push [S.MW].

Rotate [DIAL] until large “C” appears.

[i.e.]:  Programming 145.120 MHz into the Call channel 

using the microphone.

[i.e.]:  Programming 145.120 MHz into the Call channel.