Справочник Пользователя для ICOM 339000
36
8
TROUBLESHOOTING
8
TR
OUBLESHOO
TING
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF.
Even holding down
, the
DR mode will not appear.
•Thereisnorepeaterlistinyourradio.
•Reload the repeater list using the CS-51
CLONING
SOFTWARE
on the CD.
•EntertheRepeaterlistdatadirectlyintothe
transceiver.
Sec. 17 of the
Advanced In-
struction PDF
Sec. 9 of the
Advanced In-
struction PDF
Advanced In-
struction PDF
Sec. 9 of the
Advanced In-
struction PDF
Even holding down
, the
received call sign will not set to
the destination call sign.
the destination call sign.
•Thecallsignhasnotbeencorrectlyreceived.
•Whenareceivedsignalisweak,orasignalis
•Whenareceivedsignalisweak,orasignalis
received during scanning, the call sign may
not be received correctly. In that case, “--------
” appears and error beeps sound, and a reply
call cannot be made.
not be received correctly. In that case, “--------
” appears and error beeps sound, and a reply
call cannot be made.
•Try it again, after the transceiver has cor-
rectly received the call sign.
—
A Local area call can be made,
but the Gateway call or desti-
nation station call cannot be
made.
but the Gateway call or desti-
nation station call cannot be
made.
•MY call sign has not been registered on a
D-STAR repeater.
•Register your own call sign (MY) on a gate-
way repeater, or confirm the registration of
the call sign.
the call sign.
—
Position data cannot be re-
ceived.
ceived.
•“ExternalGPS”isselectedintheGPSSetitem
on the Menu screen, but an external GPS re-
ceiver is not connected.
ceiver is not connected.
•“OFF”or“Manual”isselectedintheGPSSet
item on the Menu screen.
•AGPSsignalwasnotreceived.
•ConnectanexternalGPSreceiver.
•Selecteither“InternalGPS”or“ExternalGPS”
in the GPS Set item on the Menu screen.
•MoveuntiltheGPSsignalisreceived.
After transmitting, “L” appears
on the LCD.
on the LCD.
•While receiving through the internet, some
packets may be lost due to network error
(poor data throughput performance).
(poor data throughput performance).
•Waitawhile,andtryitagain.
When the transceiver receives corrupted
data,andmisidentiiesitisasPacketLoss,
“L” is displayed, even if it is a Local area call.
data,andmisidentiiesitisasPacketLoss,
“L” is displayed, even if it is a Local area call.
—
“DV” and “FM” icons alternately
blink.
blink.
•While in the DV mode, an FM signal is re-
ceived.
•Turn ON the DV mode automatic detect
function.
Sec. 9 of the
Advanced In-
struction PDF
Advanced In-
struction PDF