Справочник Пользователя для ICOM 349500

iii

RADIO OPERATOR WARNING

Your Icom radio generates RF electromagnetic energy during 
transmit mode. This radio is designed for and classified as  
“General Population Use” in an uncontrolled environment.

This radio has been evaluated for compliance at the distance 
of 2.5 cm (1 inch) with the FCC and IC RF exposure limits for 
“General Population Use.” In addition, your Icom radio com-
plies with the following Standards and Guidelines with regard 
to RF energy and electromagnetic energy levels and evalua-
tion of such levels for exposure to humans:

s

ance with FCC Guidelines for Human Exposure to Radio Frequency 
Electromagnetic Fields.

s

for Safety Levels with Respect to Human Exposure to Radio Frequency 
Electromagnetic Fields, 3 kHz to 300 GHz.

s

mended Practice for the Measurement of Potentially Hazardous Electro-
magnetic Fields– RF and Microwave.

s

accessories other than those specified may result in RF exposure levels 
exceeding the FCC and IC requirements for wireless RF exposure.; Belt 
Clip (MB-103), Rechargeable Li-ion Battery Pack (BP-245H).

s

may damaged the radio and may also cause you to exceed FCC and 
IC RF exposure limits. A proper antenna is the antenna supplied with 
this radio by the manufacturer or antenna specifically authorized by the 
manufacturer for use with this radio.

s

cycle”). Transmitting more than 50% of the time can cause FCC and IC 
RF exposure compliance requirements to be exceeded. The radio is 
transmitting when the “transmit indicator” appears on the LCD. You can 
cause the radio to transmit by pressing the “PTT” switch.

s

when transmitting and only use the Icom belt clip which is listed on page 
43 when attaching the radio to your belt, etc., to ensure FCC and IC RF 
exposure compliance requirements are not exceeded. To provide the re-
cipients of your transmission the best sound quality, hold the antenna at 
least 5 cm (2 inches) from your mouth, and slightly off to one side.

The information listed above provides the user with the information needed 
to make him or her aware of RF exposure, and what to do to assure that this 
radio operates with the FCC and IC RF exposure limits of this radio.

During transmissions, your Icom radio generates RF energy that can possibly 
cause interference with other devices or systems. To avoid such interference, 
turn off the radio in areas where signs are posted to do so. DO NOT operate 
the transmitter in areas that are sensitive to electromagnetic radiation such as 
hospitals, aircraft, and blasting sites.