Справочник Пользователя для ICOM 352202
Thank you for purchasing the
FA-SC61UC
FA-SC61UC
UHF ANTENNA
.
Please read these instructions
thoroughly before using the
FA-SC61UC.
thoroughly before using the
FA-SC61UC.
400 MHz
420 MHz
440 MHz
460 MHz
460 MHz
480 MHz
500 MHz
520 MHz
520 MHz
380 MHz
360 MHz
0
Antenna cap
FA-SC61UC
The optimum bandwidth is ±8%
of the tuned frequency.
For optimum performance tune
to the center transmit frequency
of the radio.
The optimum bandwidth is ±8%
of the tuned frequency.
For optimum performance tune
to the center transmit frequency
of the radio.
Cutting Instructions
q
q
Align the bottom of the anten-
na onto the 0 position of the
cutting guide diagram at left.
cutting guide diagram at left.
w
Mark the antenna at the
length corresponding to the
desired frequency to be
tuned.
length corresponding to the
desired frequency to be
tuned.
FA-SC61UC
A-6532K-1EX-w Printed in Japan
© 2006-2009 Icom Inc.
e
Cut the antenna to the
marked length.
• Use a wire cutter that can
marked length.
• Use a wire cutter that can
cut at least 1.2 mm (d) of
piano wire.
piano wire.
r
Apply adhesive to the top of
the antenna and attach the
supplied antenna cap.
• Use of Cemedine Co.
supplied antenna cap.
• Use of Cemedine Co.
Super-X No. 8008 black
(Icom
(Icom
parts
number:
8950002910) or similar is
recommended.
recommended.
Antenna Cutting
Chart
Chart
NOTE:
Antenna cap must be inser ted after
cutting the element otherwise water
immersion makes the element damaged.
cutting the element otherwise water
immersion makes the element damaged.
Center
frequency
(MHz)
Length
(mm)
(mm)
185
175
165
156
148
142
136
129
125
175
165
156
148
142
136
129
125
360
380
400
420
440
460
480
500
520
380
400
420
440
460
480
500
520
CAUTION:
Making antenna cuts at other than
the prescribed lengths specified could
void the user's authority to operate
the equipment.
the prescribed lengths specified could
void the user's authority to operate
the equipment.