Справочник Пользователя для ICOM 357000
88
9
AIS Receiver (Depending on versions)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
s
prevent this, when the anchored vessel’s SOG is
less than this set value, the Slow Warn function assumes that
vessel’s COG is fixed towards your vessel and an alarm will
sound.
vessel’s COG is fixed towards your vessel and an alarm will
sound.
q Push [Y](CH) or [Z](CH) to input the value between 0.1
and 4.9 kt (in 0.1 kt steps), or select OFF. (default: 1.0 kt)
w Push [ENT] to save and return to the Menu mode.
NOTE: If other vessels at anchor or drifting come into your
alarm zone, the Slow Warn alarm will sound again. Only if
the previous vessel disappears from the Dangerous List
(p. 82), and then re-enters the list, can a new Slow Warn
or regular alarm sound, depending on the vessels SOG,
or CPA and TCPA. The Slow Warn function operates in the
same way if your vessel is at anchor and other vessels
enter your alarm zone area.
alarm zone, the Slow Warn alarm will sound again. Only if
the previous vessel disappears from the Dangerous List
(p. 82), and then re-enters the list, can a new Slow Warn
or regular alarm sound, depending on the vessels SOG,
or CPA and TCPA. The Slow Warn function operates in the
same way if your vessel is at anchor and other vessels
enter your alarm zone area.
s
q Push [Y](CH) or [Z](CH) to select either “CPA” or “TCPA.”
s
w Push [Y](CH) or [Z](CH) to input the value into that item.
s
(default: 1.5 nm)
s
(default: 20 min)
e Repeat steps q and w to input the value into the other
item.
r Push [CLEAR] to save and return to the Menu mode.
When the CPA setting
menu is selected.
menu is selected.
When the TCPA setting
menu is selected.
menu is selected.